Swimming pool lights | on ElectriciansForums

Discuss Swimming pool lights in the UK Electrical Forum area at ElectriciansForums.net

Joined
Sep 2, 2011
Messages
10
Reaction score
0
Have to put right a badly installed swimming pool light installation.

The outdoor swimming pool has mains voltage ground lights surrounding it, about 40 cm from the pool edge.

I want to replace these fittings with ELV ground lights. Replacing the cable will mean a lot of disruption, so I was hoping to keep the cable in situ and replace the fittings. 2.5mm rubber cable

Power to transformers will be outside zones, but....

Are metallic ground lights OK around a pool if ELV

Volt drop is the big concern, but I was planning to use MR16 LED lamps which have a low wattage 2-3 watts , which also won't get to hot.

Transformer minimum ratings could mean I need to run a few lamps off the same transformer , any advice on how long a run is viable, and how many lights off each transformer.
Any advice an pool electrics most welcome

Thanks

.
 
if you need to run a few lamps from the same transformer, then the length of run that is viable is down to the size of conductor you use. Volt drop is more profound on ELV systems. I uisedto hear people say that you need to keep the cable lengths the same if sharing a tx, but IMOif your cable is sufficuiently sized, then you shouldnt have any problems. Make sure your TX is designed to be used in Zone 1, or installed in such a way, thatit ois out of the zones. IMO, if a cover can be lifted to acces the transformer next to the pool, then you must treat that as zone 1, but if you have a maintenance corridor behind the pool then that is out of the zones. I used to wire large fountains, and we started to use fibre optic lighting, with great results.
FYI, auror make brilliant IP68 tx's

the tx's come with pre wried sealed leads. You can use a JB, filled with magic gel, fed by HO7 cable, and feed your lights with the same. No leaks, no dramas, and no worries
 
Metal pool surround lighting is fine at ELV voltages and if you say the TX's are located outside of the restricted zones. Your volt drop is going to be your main concern at 12Volt!! So it's down to the overall length of the cable runs around the pool...
 

Reply to Swimming pool lights in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
380
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
956
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

  • Question
One of those backlight Chinese testers may have helped that’s if the tester didn’t catch fire or electrocute you. LED TV Backlight Tester 12W LED...
2 3 4 5
Replies
68
Views
4K
Hello What was the conclusion of your problem?
Replies
1
Views
826

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top