Tails entry

[Megavolt]

While on new boards what's your preferred entry for mains tails and earth. I normally use a 32mm grommet bottom only or a comp glan on top. Cant see the point in the metal comp glans just think threr cashing in.

Tin hat on ;-)

 

[Leesparkykent]

While on new boards what's your preferred entry for mains tails and earth. I normally use a 32mm grommet bottom only or a comp glan on top. Cant see the point in the metal comp glans just think threr cashing in.

Tin hat on ;-)

I've been buying griploc tail glands from remora £1.72 for a 25mm tails and 16mm earth gland. iirc the postage was high so purchased a load in one go.

 

[stevethesparks]

why use a 32mm grommet, they will fit in a 25mm, much tighter and neater imho.

 

[Megavolt]

Duno found 2 x 25mm and a 16mm to be a tight squeeze.

 

[stevethesparks]

It is but do-able :vanish:

 

[Megavolt]

Use a 32 make life easier

 

[Sparky_Steve]

whiska do a rather nice gland
https://www.tlc-direct.co.uk/Produc...=finalurl_v2&gclid=CLzSvKiK3cwCFTUz0wodQC0BJw
or the cheaper option
GripLoc® Consumer Unit Tail Kit - Nylon Nickel Plated - Remora Electrical Limited

 

[richy3333]

The Whiska glands come free with the CEF/M2 boards if that helps anyone

 

[Megavolt]

whiska do a rather nice gland
https://www.tlc-direct.co.uk/Produc...=finalurl_v2&gclid=CLzSvKiK3cwCFTUz0wodQC0BJw
or the cheaper option
GripLoc® Consumer Unit Tail Kit - Nylon Nickel Plated - Remora Electrical Limited

Still not as cheap as a standard 32mm comp glan.