Teeside HNC Electrical and Electronic Engineering

[Connor Mennell]

Got my results back and some how got a distinction! Just started PLCs now and really enjoying it. My first TMA to do for this one soon To be fair EEP is okay until the last one! Gets a bit tricky

 

[Sproey]

Hi Guys,

I'm working my way through EEP and struggling with the last assignment Have passed the first two with Distinction and Merit, but finding the 3rd really hard. Namely Q3 and the following 3 questions.
I have done the following units and passed either Distinction or Merit - AME, DADC,EM,ES, SE, so am willing to help anybody i can?

Best Regards

RLG

 

[LiveJim]

Hi Guys,

I'm working my way through EEP and struggling with the last assignment Have passed the first two with Distinction and Merit, but finding the 3rd really hard. Namely Q3 and the following 3 questions.
I have done the following units and passed either Distinction or Merit - AME, DADC,EM,ES, SE, so am willing to help anybody i can?

Best Regards

RLG

Hi RLG,

I’m needing some help with mesh analysis, (TMA1) on EEP have you any advise or better learning material other than what’s given on the lessons?

Cheers
Jim.

 

[Sproey]

Hi Jim,

Send me an email address and i'll sort you something out?

RLG

(Staff note - Please don't post your email address in public in response to this, use the private messaging system - conversations - but please be aware, you may need to enable this in your profile before other members can PM you - Regards SC)

 

[GIZZY]

Hi guys,

Currently on pneumatics and hydraulics but need help with tma1 question 3,4 & 5

Have done tma2 & 3 and received merits so I can help out

Also completed AME, ES and EEP with distinctions.

Also cant decide what module to do next

 

[Troy22]

I’m Struggling with EEP. I have this one to go and one more to complete the course. But hit a brick wall with EEP any advice most welcome

 

[Connor Mennell]

I’m Struggling with EEP. I have this one to go and one more to complete the course. But hit a brick wall with EEP any advice most welcome

What are you struggling with? I’ve finished this pretty recently so could help out

 

[Joshua Gordon]

Is it a much better idea to complete the HNC before the HND, rather than enter into the HND without the HNC?
Is there a limit to the amount of modules you can complete each year? Or a limit to the amount of modules you can choose to study? (in reference to the HND).

 

[Connor Mennell]

Hey guys, anyone done/doing PLC's? currently on TMA 2 and just wanted to check what i've done so far!

 

[Connor Mennell]

Is it a much better idea to complete the HNC before the HND, rather than enter into the HND without the HNC?
Is there a limit to the amount of modules you can complete each year? Or a limit to the amount of modules you can choose to study? (in reference to the HND).

Hi Josh,

I don't think it matters either way with the distance learning method, basically you get a 5 year registration to complete the HNC/HND (whichever you choose) I went with the HNC first as a precaution because like you I didn't want to be locked into the HND if after the HNC i didn't want to carry it on. However I think once you finish the HNC you can just continue studying onto the HND. It doesn't sound like it matters too much as you pay for it module by module (but i am unsure as to whether the registration stays 5years from when you start either course). If you were doing the whole course, however, at a college you'd fork out for the whole course (be it by loan etc) and so locked into the whole thing. Does that make sense?

Connor

 

[Joshua Gordon]

Hi Josh,

I don't think it matters either way with the distance learning method, basically you get a 5 year registration to complete the HNC/HND (whichever you choose) I went with the HNC first as a precaution because like you I didn't want to be locked into the HND if after the HNC i didn't want to carry it on. However I think once you finish the HNC you can just continue studying onto the HND. It doesn't sound like it matters too much as you pay for it module by module (but i am unsure as to whether the registration stays 5years from when you start either course). If you were doing the whole course, however, at a college you'd fork out for the whole course (be it by loan etc) and so locked into the whole thing. Does that make sense?

Connor

Hi Connor, yeah that makes sense. I'm going to do the HNC first. So potentially i could complete the HNC in under 2 years if i work hard enough? Just asking out of interest.

 

[AyresomeBoro]

I've just recieved a Merit for EEP2 but still struggling with Question 1 on EEP1 !

 

[Connor Mennell]

Hi Connor, yeah that makes sense. I'm going to do the HNC first. So potentially i could complete the HNC in under 2 years if i work hard enough? Just asking out of interest.

Yeah for sure, I’ve been on a real go slow because way I’m doing it I won’t be able to finish the course until 3 years anyway and I don’t intend on going further at the moment. However I did do the first 2 modules in like 5/6 months and taken around 8 to do these past 2 so definitely possible

 

[GIZZY]

anyone done Digital and Analogue Circuits and Devices and can help me with modelling the circuits on pspice?

regards

 

[GIZZY]

Hi Guys,

I'm working my way through EEP and struggling with the last assignment Have passed the first two with Distinction and Merit, but finding the 3rd really hard. Namely Q3 and the following 3 questions.
I have done the following units and passed either Distinction or Merit - AME, DADC,EM,ES, SE, so am willing to help anybody i can?

Best Regards

RLG

Hi Sproey,

i can't send you a message due to your privacy settings, but i really need help with DADC would really appreciate some help with tma 2 and 3, more specifically the simetrix questions.

Regards

Gizzy