Tool bags getting a bit heavy...

[Leesparkykent]

So I've had enough of lugging around my tool bag as it was feeling really heavy. It was starting to depress me every time I pulled up outside a job...the thought of lugging it up stairs etc. I've just emptied it and Ive just noticed I've lost a few things but amongst all the tools I was carrying around 55 screwdrivers, 10 pairs of cutters, 5 crimpers, 3 levels, two chalk lines, 5 Stanley knifes, 4 bolsters, 21 hole saws, 5 chisels, 2 tapes, 6 sets of Allen keys etc. Not to mention the usual build up of carp in the bottom of the bag...screws, grommets. Choc block, wagos, 7 rolls of tape, 3.5 and M4 screws and about two rubble sacks of bits of brick, plaster board dust, saw dust etc

 

[LeeH]

How did you decide which driver to use?

 

[Octopus]

How did you decide which driver to use?

And how long does it take you to find it?

Did you weigh it?

I'm surprised you can lift it!

 

[Tes369]

Why do you have 55 drivers ?

 

[Andy78]

Why do you have 55 drivers ?

Think he's trying out all the brands. I can see wera, wiha, ck, facom, draper, bahco in there. Any I missed Lee ?

 

[Pete999]

Why do you have 55 drivers ?

Cus he is in denial of being a tool tart

 

[Marvo]

Lol I don't know where they've all come from.

I bet the other poor guys working on the same sites as you know exactly where they all came from

 

[Pete E]

View attachment 40756 So I've had enough of lugging around my tool bag as it was feeling really heavy. It was starting to depress me every time I pulled up outside a job...the thought of lugging it up stairs etc. I've just emptied it and Ive just noticed I've lost a few things but amongst all the tools I was carrying around 55 screwdrivers, 10 pairs of cutters, 5 crimpers, 3 levels, two chalk lines, 5 Stanley knifes, 4 bolsters, 21 hole saws, 5 chisels, 2 tapes, 6 sets of Allen keys etc. Not to mention the usual build up of carp in the bottom of the bag...screws, grommets. Choc block, wagos, 7 rolls of tape, 3.5 and M4 screws and about two rubble sacks of bits of brick, plaster board dust, saw dust etc

Just wondering what tool bag you are using?

Must be that new TARDIS brand?

 

[Squid]

I went through mine and cut down on stuff, not much mind you but all the loose screws and sh!te at the bottom of the bag and in the pockets I tipped in to a Halloween trick or treat box with a lid on and if needed it goes in to the boot of the car.

 

[Pete999]

Just wondering what tool bag you are using?

Must be that new TARDIS brand?

Must have been a big one all them Drivers, Crikey I thought I had tool fetishism bad but you take the biscuit on that front, LSK.

 

[Des 56]

The picture may have been a subtle plea for compassion by Lee
Try as I may,I see no sign of a Hacksaw of any sort

Poor chap may have dyslexia,each order for a saw added to the screwdriver collection

 

[Pete999]

The picture may have been a subtle plea for compassion by Lee
Try as I may,I see no sign of a Hacksaw of any sort

Poor chap may have dyslexia,each order for a saw added to the screwdriver collection

One or more of those drivers must have doubled up as a metal cutting chisel.

 

[Des 56]

One or more of those drivers must have doubled up as a metal cutting chisel.

Yes Pete,you are probably right
I can't see him blunting his perfectly good chisel, especially now the screwdriver obsession has taken its toll

 

[Pete999]

View attachment 40756 So I've had enough of lugging around my tool bag as it was feeling really heavy. It was starting to depress me every time I pulled up outside a job...the thought of lugging it up stairs etc. I've just emptied it and Ive just noticed I've lost a few things but amongst all the tools I was carrying around 55 screwdrivers, 10 pairs of cutters, 5 crimpers, 3 levels, two chalk lines, 5 Stanley knifes, 4 bolsters, 21 hole saws, 5 chisels, 2 tapes, 6 sets of Allen keys etc. Not to mention the usual build up of carp in the bottom of the bag...screws, grommets. Choc block, wagos, 7 rolls of tape, 3.5 and M4 screws and about two rubble sacks of bits of brick, plaster board dust, saw dust etc

Do you ever feel it was a mistake posting this LSK?

 

[Squid]

Maybe we should rename him to Magpie......

 

[Leesparkykent]

C.K Magma Tool Tote - http://mammothworkwear.com/c-k-magma-tool-tote-p1583.htm All that fitted in one of these.