Tradeskills4U Feedback Thread | Independent Reviews Good AND Bad (bad now!)

Discuss TradeSkills4U Feedback - The Most Recent Feedback Isn't Good! in the Electrician Courses : Electrical Quals area at ElectriciansForums.net

Dan

Staff member
Admin
Mod
Joined
Jun 28, 2007
Messages
15,032
Solutions
4
Reaction score
4,499
Location
Staffordshire
Please leave feedback if you've been on this course!

PLEASE NOTE THAT THIS THREAD IS FOR FEEDBACK RELATING TO THE COMPANY CALLED TRADE SKILLS 4U and NOT THE COMPANY CALLED TRAIN 4 TRADE SKILLS.

It has been a while since this thread was created to please do take a look at the latest threads. As they aren't good!


CLICK HERE TO GO TO PAGE 5
 
Last edited:
Please leave feedback if you've been on this course!

PLEASE NOTE THAT THIS THREAD IS FOR FEEDBACK RELATING TO THE COMPANY CALLED TRADE SKILLS 4U and NOT THE COMPANY CALLED TRAIN 4 TRADE SKILLS.
I am looking on doing the level 2 + 3 diploma 2365 course it is 16 weeks. I have spoken to trade skills 4 u and they have said that I’d need to do the NVQ part which obviously comes after the level 2 + 3 but they said the NVQ part has to be done working in the industry. Would it be a struggle getting a job with only having the level 2 + 3 diploma but then completing the NVQ when I have a job? Do I need to be fully qualified first? I am 23 years old.
 
Upvote 0
There's loads of different threads regarding Tradeskills4U, but I thought I'd throw my two pennies worth on here.

Having worked as an installation engineer for about 20 years I wanted to formalise my experience into real qualifications and concentrate on sparky work. I did a lot of research on which qualifications i needed to satisfy the likes of NICEIC etc and shopped about for a course.

Now, there are plenty of people out there who believe that they can do one of these quick courses and start wiring and fault finding. Obviously this isn't the case, but there's nothing preventing anybody, by law, from doing non-notifiable work. I'm pretty certain, from the things i've seen over the years, that there are people operating exactly like that, often doing notifiable work, and just not knowing the law let alone how do safe work. I don't know how on earth anyone expects to be able to control that goings-on, Jo Public has been kept well and truly in the dark about Part P, Notifiable etc, so they don't know what to look for. Maybe the new ESR will have some publicity like the Corgi/GasSafe scheme? But regardless of all that, anyone who attends a course and passes a recognised exam is safer than Mr Avago.

There's no substitute for experience, but the courses at Tradeskills4U are run by experienced and knowledgeable tutors with a wealth of experience in the trade, and nobody ever suggested, whilst i was there, that you could walk out of there and go it alone from day one. Sparky's with NVQ's and apprenticeships under their belt have every reason to feel that these courses offer the inexperienced the opportunity to give sparky's a bad name and undercut them. I was looking around the room myself and thinking "god help us!" about a few of the candidates after some of the questions they asked. But here's the thing, that candidate now knows the answer. They didn't have to come on this course, and until the law is changed or tightened up at least, these courses are probably saving lives. These courses also taught some of the candidates a very important lesson: They have a lot to learn!

Tradeskills4U is a professional outfit, and I was very impressed with the quality and knowledge of the tutors there. The short courses don't offer the practical skills needed to get on with it, and they can't really give much in the way of historic standards and practices that you need in the real world but, they taught me a thing or two and after 20years as an engineer, that came as a surprise.
What they said.

Trade Skills 4U are NOT the dodgy trade firm that kept popping up under various names and going bump again before they paid out their dues.

Trade Skills 4U have been a sponsor of the forum long before those dodgy firms came about, and have been here long after those dodgy firms have gone bump.

They're legit. They have members on the forum who have found them via the forum, trained with them via the forum, and become an electrician during being a member of the forum (their own doing - not claiming their win here).

Don't mix them up.

TS4U are legit and awesome and ace.

The other ones, peh. Let 'em come and go. But don't send your money their way. :)
 
Upvote 0
Hello all, first post, joined the forum today.

My name is Lee, I am 34 years old and hopefully about to embark on a career change.

Having spent the last 10 years of my life in white collar office type roles I have taken the plunge to invest in my future by starting to train for a career in Domestic Installation. In January I will be starting their Advanced Domestic Electrician Course (23 days): C&G 4141-01 Electrical Installation Domestic Dwelling > C&G 2393 Part P & Regs > C&G 2392-10 Inspection & Testing > C&G 2382 Wiring Regs > Advanced Top Up.

Whilst I am under no illusion I will be able to walk out of that classroom in February and rewire a house, my long term goal is to work for myself.

In the meantime I am wondering if at my age it is wise to look for an apprenticeship type position with a local sparky for a couple of years rather than trying to undertake non notifiable domestic work whilst I build my confidence.

Is there a stigma attached to older apprentices? or is there an abundance of school leavers leaving no room?
 
Upvote 0
Hello all, first post, joined the forum today.

My name is Lee, I am 34 years old and hopefully about to embark on a career change.

Having spent the last 10 years of my life in white collar office type roles I have taken the plunge to invest in my future by starting to train for a career in Domestic Installation. In January I will be starting their Advanced Domestic Electrician Course (23 days): C&G 4141-01 Electrical Installation Domestic Dwelling > C&G 2393 Part P & Regs > C&G 2392-10 Inspection & Testing > C&G 2382 Wiring Regs > Advanced Top Up.

Whilst I am under no illusion I will be able to walk out of that classroom in February and rewire a house, my long term goal is to work for myself.

In the meantime I am wondering if at my age it is wise to look for an apprenticeship type position with a local sparky for a couple of years rather than trying to undertake non notifiable domestic work whilst I build my confidence.

Is there a stigma attached to older apprentices? or is there an abundance of school leavers leaving no room?
I think a lot of firms who take on apprentices would prefer a 34 year old to a 21 year old who might be skiving off a bit with hangover and whatnot. 34 is young.

Might be hard right now to find apprenticeships but see what you can find out in your area matey.

Can always put a request in the looking for work forum. And also monitor the work up for grabs forum (you can click to subscribe to new threads posted in there to get notified of work going).
 
Upvote 0
I think a lot of firms who take on apprentices would prefer a 34 year old to a 21 year old who might be skiving off a bit with hangover and whatnot. 34 is young.

Might be hard right now to find apprenticeships but see what you can find out in your area matey.

Can always put a request in the looking for work forum. And also monitor the work up for grabs forum (you can click to subscribe to new threads posted in there to get notified of work going).
Thanks Dan, I really appreciate the reply.

As an added incentive to potential employers Im very much an "all the gear with no idea" kinda guy so they will no doubt have access to a lot of the expensive kit I have started to buy but don't know how to use :)

Joking aside, I am willing to put the graft in on an apprentice rate for a couple of years if needs be and will do it with a smile on my face.

I'll do exactly what you suggested and see how things go. I have 12 weeks to get the ball rolling...
 
Upvote 0
I think a lot of firms who take on apprentices would prefer a 34 year old to a 21 year old who might be skiving off a bit with hangover and whatnot. 34 is young.

Might be hard right now to find apprenticeships but see what you can find out in your area matey.

Can always put a request in the looking for work forum. And also monitor the work up for grabs forum (you can click to subscribe to new threads posted in there to get notified of work going).
I had a conversation with a spark yesterday and may have secured a role as a mate installing EV Chargers :)
 
Upvote 0
Hello all, first post, joined the forum today.

My name is Lee, I am 34 years old and hopefully about to embark on a career change.

Having spent the last 10 years of my life in white collar office type roles I have taken the plunge to invest in my future by starting to train for a career in Domestic Installation. In January I will be starting their Advanced Domestic Electrician Course (23 days): C&G 4141-01 Electrical Installation Domestic Dwelling > C&G 2393 Part P & Regs > C&G 2392-10 Inspection & Testing > C&G 2382 Wiring Regs > Advanced Top Up.

Whilst I am under no illusion I will be able to walk out of that classroom in February and rewire a house, my long term goal is to work for myself.

In the meantime I am wondering if at my age it is wise to look for an apprenticeship type position with a local sparky for a couple of years rather than trying to undertake non notifiable domestic work whilst I build my confidence.

Is there a stigma attached to older apprentices? or is there an abundance of school leavers leaving no room?
Hi Lee,

I am in a very similar position to yourself (36 yo) and i am looking to start a course at some point this year hopefully, depending on if i get a C&G bursary. Will even look to work for free on weekends if anyone will have me haha basically i dont think its too old at all to begin an apprenticeship and being a little older and wiser might even be seen as a better bet. let us know how you get on with your course and progress from that point on.
 
Upvote 0
Hi Lee,

I am in a very similar position to yourself (36 yo) and i am looking to start a course at some point this year hopefully, depending on if i get a C&G bursary. Will even look to work for free on weekends if anyone will have me haha basically i dont think its too old at all to begin an apprenticeship and being a little older and wiser might even be seen as a better bet. let us know how you get on with your course and progress from that point on.
Just PM’d you mate...

really happy with the course so far...

feel pretty confident RE basic installs (IN PERFECT CONDITIONS)

if you really want to get the most out of these courses you need to have a passion for further learning.

You are taught everything as advertised but it’s like learning to drive...you/I will learn far more once you/I are on the tools after you have completed the course.

I have become pretty engrossed with the theory side... I’d recommend you spend an hour with your head in the Regs books and OSG for every hour you spend in a classroom/e learning.
 
Upvote 0
What is a reasonable expectation for finding work after completing the C&G 2365 lvl 2 and 3 course?

From what I understand there are a few door that open. Obviously finding an apprenticeship is the best route to a career, with volunteering time to gain experience on the tools and knowing or finding someone willing to take you on as a trainee other good options.

Would I be able to apply for work as an Electricians Mate with no prior experience if I find the right opening? Or is there a general expectation that to apply for a job role I would have onsite experience beforehand?
 
Upvote 0
Who just wants to do a 'Domestic installer " course and stick with the work available that falls under this scheme ? Thinking of doing this to just cover kitchen install work , Consumer boards and lighting .No real further dreams to expand more etc !
 
Upvote 0
Who just wants to do a 'Domestic installer " course and stick with the work available that falls under this scheme ? Thinking of doing this to just cover kitchen install work , Consumer boards and lighting .No real further dreams to expand more etc !

This is exactly my position.

I personally only want to do domestic work.
 
Upvote 0

Reply to TradeSkills4U Feedback - The Most Recent Feedback Isn't Good! in the Electrician Courses : Electrical Quals area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
693
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
1K
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
3K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Electrical Courses

This is the main Electrical Courses at ElectriciansForums.net. Find local recommended electricians courses. Avoid training "company" scams. Always go view the training centre before booking any electrical courses.
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top