URGENT 2394 in 2 hours time!!!!!

[mwigham85]

Hi I've got my 2394 in a couple of hours and a practise question was write a list of consumer units and protective devices cheapest to most expensive good and bad points for each. Plus if anyone knows of random stuff they might ask cheers

 

[andyk1969]

no visual damage to insulation,no burrs or sharp edges on cable entries, metal back boxes earth, correct connection of conductors,can't remember the last one

 

[andyk1969]

just about didn't even touch on it in the course just from memory. i put 150mm from floors, ceilings and corners, straight lines vertically or horizontally between accessories? can't bring myself to check in the on-site guide tonight

- - - Updated - - -

 

[andyk1969]

Polarity, earth sleeving, live conductors insulated, correct colours, connections mechanically sound but in gn3 it's different so maybe not as good as I thought. You?

didn't it say with sight?

 

[growler]

just about didn't even touch on it in the course just from memory. i put 150mm from floors, ceilings and corners, straight lines vertically or horizontally between accessories? can't bring myself to check in the on-site guide tonight

- - - Updated - - -

dont think its from floors..

- - - Updated - - -

did mine today when do results come out ?

 

[andyk1969]

dont think its from floors..

- - - Updated - - -

did mine today when do results come out ?

your right just looked its not from floors, we've been told 6 weeks will be starting 2395 before we get the results from night

 

[growler]

what did you put for the information given to tester from designer relating to final circuits ? or something along those lines ....

 

[mwigham85]

Make sure you learn how to test an earth electrode using temporary earth rods etc as it came up in my 2395 yesterday and I had no idea

 

[andyk1969]

what did you put for the information given to tester from designer relating to final circuits ? or something along those lines ....

really blagged this one i put design current, ambient temperature thats all i could think off in the last few mins

what about the pv question

 

[Guest55]

what did you put for the information given to tester from designer relating to final circuits ? or something along those lines ....

a designer would give a tester info such as expected / calculated Zs , R1+R2 . Ib & protective device type / size.