VDE Screwdrivers recommendations | Page 3 | on ElectriciansForums

Discuss VDE Screwdrivers recommendations in the Electrical Tools and Products area at ElectriciansForums.net

Just had a look at screwfix 6 pc wiha slim set for £23. Good price if it’s the right sizes

Yep that is the set I picked up a year or so ago , think I paid £28 or £29 back then ,which for 6 quality drivers is great value

I have used and abused them week in week out and they are still going strong
 

Yep that is the set I picked up a year or so ago , think I paid £28 or £29 back then ,which for 6 quality drivers is great value

I have used and abused them week in week out and they are still going strong
I just bought them. Heading out to pick them up.

Really I only need a #2 pozi and a slotted that fits a standard double socket terminal.
I’m sick of the rounded off tips of the ones I’ve got slipping out the terminal and finding the palm of my hand!
 
I just bought them. Heading out to pick them up.

Really I only need a #2 pozi and a slotted that fits a standard double socket terminal.
I’m sick of the rounded off tips of the ones I’ve got slipping out the terminal and finding the palm of my hand!
I have tried sharpening rounded flat heads in the past but when you can but a whole new set for 20 quid, now just bin rounded drivers.
Honestly 20 quid for 6 drives its insane value for money
 
Prime tools have an offer on Wiha VDE screwdrivers at the moment:

What's more, they have a 20% discount code valid until end of today "MAY20".
If you spend enough (£40 excl VAT) shipping is free; you could always buy several sets!
But there is lots more VDE stuff to tempt you, if so inclined (don't ask).

As a bonus, the set doesn't include the useless neon screwdriver that some sets include!

I stocked up over the weekend.
 
Prime tools have an offer on Wiha VDE screwdrivers at the moment:

What's more, they have a 20% discount code valid until end of today "MAY20".
If you spend enough (£40 excl VAT) shipping is free; you could always buy several sets!
But there is lots more VDE stuff to tempt you, if so inclined (don't ask).

As a bonus, the set doesn't include the useless neon screwdriver that some sets include!

I stocked up over the weekend.
That's a good price, but unfortunately not the slim version that's on sale at Screwfix.
Their price for the slim set is £34.79, less 20% in the sale, which ends today:


 
thing i found with the Wiha slims is that the bits were always falling out. usually into a pile of crap left by plasterers et al, or into an inaccessible place.
 
The multi-bit changeable screwdrivers have their uses like if you want to travel light to a small call-out job or doing EICRs and you only want to take a small carry bag with you.
But for day to day use where you use your screwdrivers for prying , poking , prodding , bashing etc I use my normal screwdrivers , they take more punishment and if you snap or bend one they are cheap to replace
 
I find the Wiha and Wera ones ok, the CK and Bahco ones seemed to break if you looked at them the wrong way. I use Facom Expert at the minute, had my set for over 3 years and no breakages and still in top nick. Very comfortable to work with.

Did lose one of the 10 piece set no more than a few minutes after getting them, that's happened with most sets of screwdrivers I've ever bought. Someone somewhere has a lot of tea stirrers though😆
 
Facom is actually the one brand I haven't tried (yet) but everyone seems to rate them so I know which drivers will be next on my shopping list when my Wiha slims give up the ghost
 
I find the Wiha and Wera ones ok, the CK and Bahco ones seemed to break if you looked at them the wrong way. I use Facom Expert at the minute, had my set for over 3 years and no breakages and still in top nick. Very comfortable to work with.

Did lose one of the 10 piece set no more than a few minutes after getting them, that's happened with most sets of screwdrivers I've ever bought. Someone somewhere has a lot of tea stirrers though😆
CK tools are pretty poor quality Imo , they do the job but the screwdriver heads round much quicker than other brands.
I used to like Bahco and have had several sets over the years, the earlier sets lasted ages without rounding / snapping. But the newer ones aren't as good. I reckon then have cheapened them down for the DIY market to get into the big sheds
 
I know they aren;'t fashionable but the basic Draper expert Vde srewdrivers that you get in the blue carry box aren't bad.
I picked up a set from Wickes in the Pandemic for like £11 on offer and they are okay for small jobs etc
 
I find the Wiha and Wera ones ok, the CK and Bahco ones seemed to break if you looked at them the wrong way. I use Facom Expert at the minute, had my set for over 3 years and no breakages and still in top nick. Very comfortable to work with.

Did lose one of the 10 piece set no more than a few minutes after getting them, that's happened with most sets of screwdrivers I've ever bought. Someone somewhere has a lot of tea stirrers though😆

I know a few sparks who detest interchangeable baldes, but also a few who bought a Wera set and couldn't believe how convenient it was to carry every option in a small pouch.

Can't ever set blades down or you'll never see them again. Keep them in a pocket or some other bugger will get a bonus - they seem to find the near side of tray and become almost invisible.

CK tools are pretty poor quality Imo , they do the job but the screwdriver heads round much quicker than other brands.
I used to like Bahco and have had several sets over the years, the earlier sets lasted ages without rounding / snapping. But the newer ones aren't as good. I reckon then have cheapened them down for the DIY market to get into the big sheds

A lot of the guys I work with swear there's no bsetter drivers than CK Dextro. I don't like them, with the exception of the large flat head, but swear by CK side cutters and shears.
 
I know a few sparks who detest interchangeable baldes, but also a few who bought a Wera set and couldn't believe how convenient it was to carry every option in a small pouch.

Can't ever set blades down or you'll never see them again. Keep them in a pocket or some other bugger will get a bonus - they seem to find the near side of tray and become almost invisible.



A lot of the guys I work with swear there's no bsetter drivers than CK Dextro. I don't like them, with the exception of the large flat head, but swear by CK side cutters and shears.
They aren't interchangeable blades, they are a full set of screwdrivers.

I've a set of Wera with interchangeable blades that I next to never use, and the Armeg Torque Screwdriver has interchangeable blades that is next to never used used when required.

If you need a PZ1, PZ2 and a 4.0mm flat head I find nothing more convenient than taking those 3 screwdrivers with you, rather than a set of interchangeable ones where you are constantly changing between them.
 
They aren't interchangeable blades, they are a full set of screwdrivers.

I've a set of Wera with interchangeable blades that I next to never use, and the Armeg Torque Screwdriver has interchangeable blades that is next to never used used when required.

If you need a PZ1, PZ2 and a 4.0mm flat head I find nothing more convenient than taking those 3 screwdrivers with you, rather than a set of interchangeable ones where you are constantly changing between them.
I call this the Holy Trinity of drivers that live in my pouch all the time. All other drivers live in the side of my bag.
 

Reply to VDE Screwdrivers recommendations in the Electrical Tools and Products area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
250
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
723
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
695

Similar threads

You can buy the wera ends in singles for replacing broken and worn ends which is nice
Replies
14
Views
2K
I use Xero for invoicing and sending estimates I use a different program (Quicken - not Quickbooks) as I have had it from 2004 and it still...
2
Replies
17
Views
2K

Electricians Tools | Electrical Tools and Products

Thanks for visiting ElectriciansForums.net, we hope you find the Electricians Tools you're looking for. It's free to sign up to and post a question yourself to find a tool or tool supplier either local to you, or online. Our community of electricians and electrical engineers will do their best to find the best tool supplier for you.

We also have a Tiling Tools advice from the worlds largest Tiling community. And then the Plumbers Forums with Plumbers Tools Advice.

Search Electricans Forums by Tags

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top