Velux windows 1st fix | on ElectriciansForums

Discuss Velux windows 1st fix in the UK Electrical Forum area at ElectriciansForums.net

bigspark17

-
Arms
Joined
Sep 22, 2012
Messages
1,560
Reaction score
733
Location
wales
Hi guys. On a 1st fix and last min before closing up customer has decided on electric velux windows, how do you wire up for these? Is it a 3amp supply to "open/close" switch then 3c & earth up to windows? If remote control do you just drop a 3amp supply up to the window?
Appreachiate any help
 
Think it depends on model, but I just looked at Velux, the Integra installation instructions show a mains cable going to the window, and then control is done via a remote pad.

You're gonna have to get model information and lookup the install instructions on Velux I think.
 
The last ones I did were remote control just need a 3 amp supply as you say.
The come with a plug top on about a meter of flex, I tested them with extension lead then cut plug top off (it's still covered by warranty I rang up and checked)
I drilled noggin and fed flex thru so that I could then mount FCU about a foot above window - looked ok

Failing that just leave them a pole with a hook on the end
 
The last ones I did were remote control just need a 3 amp supply as you say.
The come with a plug top on about a meter of flex, I tested them with extension lead then cut plug top off (it's still covered by warranty I rang up and checked)
I drilled noggin and fed flex thru so that I could then mount FCU about a foot above window - looked ok

Failing that just leave them a pole with a hook on the end
 
The last ones I did were remote control just need a 3 amp supply as you say.
The come with a plug top on about a meter of flex, I tested them with extension lead then cut plug top off (it's still covered by warranty I rang up and checked)
I drilled noggin and fed flex thru so that I could then mount FCU about a foot above window - looked ok

Failing that just leave them a pole with a hook on the end
 
The last ones I did were remote control just need a 3 amp supply as you say.
The come with a plug top on about a meter of flex, I tested them with extension lead then cut plug top off (it's still covered by warranty I rang up and checked)
I drilled noggin and fed flex thru so that I could then mount FCU about a foot above window - looked ok

Failing that just leave them a pole with a hook on the end
 
Last edited:
The last ones I did were remote control just need a 3 amp supply as you say.
The come with a plug top on about a meter of flex, I tested them with extension lead then cut plug top off (it's still covered by warranty I rang up and checked)
I drilled noggin and fed flex thru so that I could then mount FCU about a foot above window - looked ok

Failing that just leave them a pole with a hook on the end

New York, New York 'So Good They Named It Twice' thrice :)
 
how do these work at night?
They also have a battery. I've done a few over the last couple of years. The normal ones are just mains fed and have a remote/wireless controller and the integra solar ones just have a remote/wireless controller. You just have to pair the controller to the window. The older versions used to come with a retractive switch but I haven't seen them installed for a few years now.
 
You can also get the velux klf 100 interface for them. Then fit a retractive center off, if they loose the remote control they have a wall switch for them. The interface is rf too so it doesn't even need to be near the window, and it can control multiple windows at once. Works well in my experience, I integrate them into home automation systems using these.
 
I just wondered because I have not seen one before.
I have fitted quite a few of the conventional type.
I suppose if the battery is near it's threshold and the window is open it will close it too?
 

Reply to Velux windows 1st fix in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
439
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
1K
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

I'm begining to think like this now, I very rarely work for builders anymore but the couple that I still do work for are the worst payers out of...
    • Like
    • Agree
Replies
8
Views
682
  • Question
In the mind of someone lying there wide awake at 3AM, just about anything.
    • Like
2
Replies
25
Views
3K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top