voltage tester

[Sonia Norman]

Hi

I am probably going to sound stupid asking this question but here goes. I have just bought a new LAP voltage tester. when testing my plug sockets using a socket test connector I am getting a reading of .410V. Now this is where I will probably sound stupid but I was expecting around the 230V as is the voltage provided in uk houses. Can someone put me right please.

sonia

 

[Pete999]

all i was doing was making sure it worked before hand

That's part of the safe isolation procedure, and why you need a proving unit.

 

[davesparks]

Never heard of the 10 point check, can you enlighten me? oh and before anyone has a go I do know how to isolate safely, just intrigued by the 10 point check.

Point 1 - L1 - L2
2 - L1 - L3
3 - L2 - L3
4 - L1 - N
5 - L2 - N
6 - L3 - N
7 - L1 - E
8 - L2 - E
9 - L3 - E
10 - N - E

 

[Simonslimline]

Never heard of the 10 point check, can you enlighten me? oh and before anyone has a go I do know how to isolate safely, just intrigued by the 10 point check.

Maybe she means for TP?


Edit, beaten by Davesparks.

 

[telectrix]

Point 1 - L1 - L2
2 - L1 - L3
3 - L2 - L3
4 - L1 - N
5 - L2 - N
6 - L3 - N
7 - L1 - E
8 - L2 - E
9 - L3 - E
10 - N - E

and what's wrong with a wet finger on each of those shiny brass terminals?

 

[happysteve]

I think there's some folk at cross purposes here. It's not helped by Screwfix using incorrect terminology. Here's what Mark (MDF) thinks the OP is referring to:

from this web page: LAP MS8902H AC Voltage Detector Pen | Voltage Testers | Screwfix.com

Here is (I think) what Sonia is referring to:

... from this web page: LAP Voltage Tester | Voltage Testers | Screwfix.com

Note that Screwfix (and Sonia) incorrectly refer to this as a "Voltage Tester". Whether it meets the requirements of GS38 or not I don't know. But it's the right tool for the job. <-- Edit: alright, let's change that to "closer to the right tool for the job." Looking at the photo, it looks more like a glorified multimeter than an AVI. Too complicated for the job.

Screwfix also call this a "Voltage tester": Kewtech KT1780/S AC/DC Voltage Tester | Voltage Testers | Screwfix.com
... and that definitely is an "Approved Voltage Indicator."

So. Terminology is important. As 3 pages of posts illustrates, if you use the wrong terminology, the best that can happen is some folk get the hump, the worst that can happen is someone reads something (that's incorrect), thinks they know what they're doing, and kills themself or someone else.

Now. Where's that beer? Peace, all.

 

[spark 68]

Nah! just someone's pi$$ed in shreks beer lol

 

[davesparks]

I think there's some folk at cross purposes here. It's not helped by Screwfix using incorrect terminology. Here's what Mark (MDF) thinks the OP is referring to:

from this web page: LAP MS8902H AC Voltage Detector Pen | Voltage Testers | Screwfix.com

Here is (I think) what Sonia is referring to:

... from this web page: LAP Voltage Tester | Voltage Testers | Screwfix.com

Note that Screwfix (and Sonia) incorrectly refer to this as a "Voltage Tester". Whether it meets the requirements of GS38 or not I don't know. But it's the right tool for the job.

Screwfix also call this a "Voltage tester": Kewtech KT1780/S AC/DC Voltage Tester | Voltage Testers | Screwfix.com
... and that definitely is an "Approved Voltage Indicator."

So. Terminology is important. As 3 pages of posts illustrates, if you use the wrong terminology, the best that can happen is some folk get the hump, the worst that can happen is someone reads something (that's incorrect), thinks they know what they're doing, and kills themself or someone else.

Now. Where's that beer? Peace, all.

Unless you want to use GS38 terminology and call it a voltage detection instrument!

 

[DPG]

It's not so much that they are using incorrect terminology, it's more the fact that 'Voltage Tester' can mean different things, whether it's a fully approved tester or just a volt-stick. Daz

 

[Guest77]

I think there's some folk at cross purposes here. It's not helped by Screwfix using incorrect terminology. Here's what Mark (MDF) thinks the OP is referring to:

.

:smilielol5::smilielol5::smilielol5::smilielol5::smilielol5::smilielol5::smilielol5:

 

[DPG]

MDF, ha ha. Hi woody!

 

[Sonia Norman]

It is the second piece of equipment shown. But I am listening to the experts and in the process of getting a martindale. Thanks

 

[happysteve]

It is the second piece of equipment shown. But I am listening to the experts and in the process of getting a martindale. Thanks

You'll be right with a Martindale. And yep, join the trainee section, it's nice there.

 

[Des 56]

Do you know what, I have offered to work for free with numerous companies because I understand I lack the on site training. Not one company is willing to give me that chance. I'm a single mum, ex forces, reliable and trustworthy. Just trying to get back to work and provide for my family within school hours. It's impossible to get a break!

Difficult but not impossible sonia
Try your local contractors,not by mail but in person,turn up on their doorstep and opt for paid work as a mate,don't offer free labour,it will attract the seediest type of employer,it will do you no good

Being armed forces trained that should be a big plus in your favour in your search
the training in the forces is excellent


Oh and don't listen to recommendations of garbage,get yourself a Fluke lol

 

[Marvo]

Okay guys, please can we be less abrasive and not jump into threads boots first, whilst Sonia may be inexperienced her question had merit. I've removed some of the less savory posts.

 

[GB.Kayak]

Do you know what, I have offered to work for free with numerous companies because I understand I lack the on site training. Not one company is willing to give me that chance. I'm a single mum, ex forces, reliable and trustworthy. Just trying to get back to work and provide for my family within school hours. It's impossible to get a break!

Hi there Sonia, there are a few ex Forces on here, welcome. What were you doing in the Forces?