We Went Wrong In Life | on ElectriciansForums

Discuss We Went Wrong In Life in the Electricians Chat - Off Topic Chat area at ElectriciansForums.net

Joined
Jun 23, 2013
Messages
21
Reaction score
-12
Location
DOWNHAM MARKET
Sadly we have in the family a divorce and i noticed the solicitor is ÂŁ210 plus vat an hour , which got me thinking my dentist is around ÂŁ100 an hour a car mechanic ÂŁ50 per hour , yet here we are with our lives and peoples lives in our hands , and around here if you charge ÂŁ25 an hour your expensive and very likely undercut . Recently i priced two bungalows up chased in re - wires , myself to chase and plaster at ÂŁ3500 each and they looked at me as if i was insane . Electrical around here is dead as a way of getting on , its just a survival job . No money in these rural areas at all . Should have gone to university but not intelligent enough . quite true the rich get richer and the poor must struggle to remain poor.
 
That's around Norfolk way. Have you tried relocating or even expanding the area you work.I am working for nearly half the salary I was on 9 years ago.!
 
yep.us sparks are the most undervalued trade going. partly because of the Electrical Trainee's.... you learn a trade in 5 years (minimum) then take advanced courses, updated quals., etc.and are worth maybe ÂŁ50/hour, yet the Electrical Trainee's undercut. they go in @ ÂŁ20 just to get the work to recover the short course fees. then there's the kitchen fitters, builders, etc. that think anyone can do it. it's only 3 wires, innit?
 
During the recession I lost my business for that very reason, was charging ÂŁ18 per hour for day rate doing large industrial installations. Then boom recession and then a lot of sparks struggling and I was undercut on what I thought was very reasonable if not low.
With that I went worked for a Facility company to get me by and they wouldn't pay me more than 21k a year.
Safe to say that served its purpose and I've been lucky enough for past 3 years to be back to JIB+ rates.
I may not have my own business anymore but there are jobs out there close to the 40k mark again.
Chin up and your skills will be recognised and rewarded
 
it's a bit late for me. i'll be 70 in november. lol. scaling down a bit, doing the smaller jobs now. just for once, i'd like to get a couple of weeks let loose with a ton or so of tray, trunking and galv conduit.
 
I priced up a job earlier this evening, a mid 70s terraced house just bought and they're ripped the downstairs ceilings down. Quote was for new CU & resite from garage into hall as that's becoming a bedroom for an elderly relative, 4 double sockets & centre light in said bedroom,LED downlights in hall, kitchen, new ensuite and main bathroom [14 in total] , 12 additional double sockets and various other small bits and pieces including 'centering' all the offset bedroom pendants. I quoted ÂŁ1580 and apparently a bloke a few doors down [NIC D.I.] has quoted ÂŁ500 less !
 
I priced up a job earlier this evening, a mid 70s terraced house just bought and they're ripped the downstairs ceilings down. Quote was for new CU & resite from garage into hall as that's becoming a bedroom for an elderly relative, 4 double sockets & centre light in said bedroom,LED downlights in hall, kitchen, new ensuite and main bathroom [14 in total] , 12 additional double sockets and various other small bits and pieces including 'centering' all the offset bedroom pendants. I quoted ÂŁ1580 and apparently a bloke a few doors down [NIC D.I.] has quoted ÂŁ500 less !

Did you laugh when they told you that? :)
 
I've had no real issues getting my rate, but round here the Gas Man and Plumbers are the ones laughing. In particular the Gas Man - on an oil to gas conversion they are lifting ÂŁ500-ÂŁ800 a day.
 
Yes because the other price probably didn't exist, if it did ,they bloke probably had a fit when he realized what was involved.
In situations like that I used to do as you did , by saying " he's got the job." Most times they got back to me.
 
Posted here just to keep in the loop. Think every domestic customer I've done work for, don't worry about the state of their electrical installation, as long as the lights still come on and the oven and socket for the iPhone charger works.'

'I'm having a new kitchen or bathroom, pay a fortune for that, spose I need a few electrics or lights, can't cost more than a couple of quid'. Go's along the lines of new sink, with water coming out of the tap. Some people have no idea, save spending thousands on loads of new wood for their designer kitchen.
 
Know how everyone feels, i am employed but have to provide my own transport, tools, meter, steps, etc. Just sold my car and bought a van and really feeling skint all the time. Plus the tyrant wont pay me anymore than ÂŁ12 an hour!!! im self sufficient at work and never have any callbacks or complaints compared to all the other monkeys on the books. I feel the trade is really suffering in terms of fair pay and recognition of Properly trained sparks. Plumbers are killing it round my way as well as the carpenters!!!
 
I've had no real issues getting my rate, but round here the Gas Man and Plumbers are the ones laughing. In particular the Gas Man - on an oil to gas conversion they are lifting ÂŁ500-ÂŁ800 a day.

I'm doing my gas ATM for that very reason :). On a combi swap round here they are nicking a grand for not even a full days work.
 

Reply to We Went Wrong In Life in the Electricians Chat - Off Topic Chat area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
271
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
766
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
771

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top