What do YOU want to earn as an Electrician | Page 2 | on ElectriciansForums

Discuss What do YOU want to earn as an Electrician in the UK Electrical Forum area at ElectriciansForums.net

Joined
Sep 17, 2019
Messages
5
Reaction score
0
Location
Redhill
Hi there,

Have been working self employed for over a year now and sometimes still struggle with pricing,

I’m based just outside of London but sometimes go into London for jobs.

Would be nice to find what other sparks charge? Hourly/ Day rates etc.

Normally my day rates are from 200-250 depending where and my hourly is ÂŁ60 for first hour and ÂŁ30 subsequent.

Any advise would be appreciated!

Thanks, Kevin
 
You know, I've not read a single thread in there for about, I dunno, 3 years? - because the last time I did, I thought it was spam. It had about the same amount of Chinese in it as the spam we were getting at the time lol

Hieroglyphics everywhere.

If I were going to fall back on a trade it'd be tiling. But I tell you what, in a similar thread "What are tiling rates where you are?" they average about ÂŁ100 per day. And a similar one on (water) plumbers it's ÂŁ150. Gas plumbers about the same as sparks it seems. Harder to bend copper pipes than cable though so I think I'd become a sparks in another life.

Well up here in Yorkshire I can point you to self employed tilers on ÂŁ200- ÂŁ300/day and gas plumbers on ÂŁ45/hour. I can also show you adverts for jobs for sparks a couple of quid above minimum wage, and quotes from self employed sparks that cut 30-40% off my prices.
My mate is a bricky and his labourer/mixer is on more than ÂŁ150/day.
Your tilers and plumbers are either singing it down a bit or need to pull their socks up.
 
Most ceramic tilers work on a metre rate , a good experienced tiler can earn ÂŁ300 per day comfortably on by the metre bathroom job in London.
Gassafe in London and you basically have your own license to print money.
You are looking at ÂŁ250 for half a day for a gassafe engineer in London...
 
Well up here in Yorkshire I can point you to self employed tilers on ÂŁ200- ÂŁ300/day and gas plumbers on ÂŁ45/hour. I can also show you adverts for jobs for sparks a couple of quid above minimum wage, and quotes from self employed sparks that cut 30-40% off my prices.
My mate is a bricky and his labourer/mixer is on more than ÂŁ150/day.
Your tilers and plumbers are either singing it down a bit or need to pull their socks up.
Check that thread on tilers mate. There isn't a tiler on the planet earning 300 a day unfortunately because some are bloody worth it mate. It's a real shame.

There are no regulations at all in the tiling trade so these reviews sites have knocked down all trades like that.

I do know Victorian geometric tilers that might reach that. But that's a totally different type of tiling. That's an art.

But north south east and west Yorkshire there are very very good tilers on 150 max. Some okay ones 100. Some go in cheap as you can on my builder and Facebook posts type tilers that aren't so good tiling for 50 quid a day.

As long as the tiles dont fall off customers can be happy with the work.

I'm helping get customers see what good tiling is with some threads and categories on there. And getting our tilers who we know are good the work from the forum.

The directory on there was established until I upgraded the forum early this year so I've had to get on their directory first. But it's working. :)
 
Check that thread on tilers mate. There isn't a tiler on the planet earning 300 a day unfortunately because some are bloody worth it mate. It's a real shame.

There are no regulations at all in the tiling trade so these reviews sites have knocked down all trades like that.

I do know Victorian geometric tilers that might reach that. But that's a totally different type of tiling. That's an art.

But north south east and west Yorkshire there are very very good tilers on 150 max. Some okay ones 100. Some go in cheap as you can on my builder and Facebook posts type tilers that aren't so good tiling for 50 quid a day.

As long as the tiles dont fall off customers can be happy with the work.

I'm helping get customers see what good tiling is with some threads and categories on there. And getting our tilers who we know are good the work from the forum.

The directory on there was established until I upgraded the forum early this year so I've had to get on their directory first. But it's working. :)

Shame really to know that guys are only on that money. If the forum members speaking of that then it must show that a good proportion of them are on those wages.
I have though met plenty of tilers, plasterers, and bathroom fitters all on over ÂŁ200/day, and all busy.

One tiler I know got paid for ÂŁ375 for a kitchen done in brick tiles I was working on, although he provided the adhesive and grout. He was at it like a whirlwind and packed up by 2.30. Chatted to him and he said it was a good day, but not far off his standard daily wage. Another was on on around ÂŁ300/day travelling the country for a posh bathroom company. That was a bit specialist though.. massive tiles they were using and they did all their own prep work getting the walls sorted beforehand.
 
Shame really to know that guys are only on that money. If the forum members speaking of that then it must show that a good proportion of them are on those wages.
I have though met plenty of tilers, plasterers, and bathroom fitters all on over ÂŁ200/day, and all busy.

One tiler I know got paid for ÂŁ375 for a kitchen done in brick tiles I was working on, although he provided the adhesive and grout. He was at it like a whirlwind and packed up by 2.30. Chatted to him and he said it was a good day, but not far off his standard daily wage. Another was on on around ÂŁ300/day travelling the country for a posh bathroom company. That was a bit specialist though.. massive tiles they were using and they did all their own prep work getting the walls sorted beforehand.
Ahhh adhesives and grouts aren't cheap these days. They have a lot of additives in them usually. Mind you, not for a kitchen splashback.

If it was brickbond metro tiles, they're a pain in the arse. He might have charged more for those.

Doubt he'd be on that every day though.

It's a shame, our average age is higher on our tile forum because they don't retire. We have 68 year olds still tiling 5 days. Lugging a tonne a week around, often upstairs. Always on their knees.

Trying to compete with ÂŁ80 a day whipper snappers from the eastern block (don't want this thread going off on one here - they're allowed to come here, and tile, etc - I'm just saying, their living costs are pence compared to our older guys etc etc - nuff said).

I hope it changes for them. And I couldn't get back into it. I broke my back a few years ago, and had both my cartilage out of my knees earlier this year. Can't crawl on the bed for long lol ;) ;)
 
Tiler who did my parents kitchen floor charged ÂŁ380 labour and was done in a day (was a long day but he didn't want to come back)
 

Reply to What do YOU want to earn as an Electrician in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
373
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
938
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

  • Question
After fitting out the first room of downlights.... i expect him to get a bit speedier at fitting them There is so many unknowns to price at this...
2
Replies
25
Views
2K
Hi all, We're looking for an experienced electrician based around the Surrey area. Carrying out various works mainly in the commercial sector -...
Replies
0
Views
555

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top