What to look for in an apprentice? | Page 3 | on ElectriciansForums

Discuss What to look for in an apprentice? in the UK Electrical Forum area at ElectriciansForums.net

Joined
Dec 9, 2017
Messages
214
Reaction score
83
Location
Manchester, UK
Hi,

We are looking for an apprentice, they will have started in September, so will have a little knowledge.
Obviously someone keen and willing.
But what else would you look for?
It’s in a factory.
Thanks.
 
Not electrics, but I remember my grandfather telling me about his time as an apprentice engineer. He was just left school at 14 and reported to the maintenance department of the factory at 6am sharp. The foreman took him down to the power room, where there was a huge steam engine that supplied power to all the machines through overhead shafts.

The engine as already running (Starting it up was a lesson for another day) and there was a huge flywheel turning and partly let into a pit in the floor. His job was to sit on the edge of the pit and squirt oil onto the crank as it went past.

Elf n' Safety - what's that?
 
Iam an apprentice I do everything for my journeymin (but whipe his a@@rs)
When going to jobs try to get in your head what materials you is needed for the job I set everything up ladders etc so he can just do his job after job is done tools are back in the bag ladders are away on the van final check to see if tools are left or anything I haven’t picked up I get him coffee every day which don’t think he relies is a pretty penny at the end of the week he shouts at me all the time when u muck up Iam a nervous wreck half the time going to work in case I get it from him it’s tuff but if you have a decent journeymin your lucky
Great post. It’s what I also look for. That and the ability to walk a little faster!
 

Reply to What to look for in an apprentice? in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
299
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
807
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
848

Similar threads

Haha! Normally I would sweat just reading those posts! I'm not that steady on my feet when I'm standing on the ground, so ladders are hateful for...
    • Like
Replies
3
Views
346
Thanks mate for the advice, this is just what I was looking for. I think I’ll have to put some thought into the domestic route due to the NVQ and...
Replies
2
Views
358

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top