which automatic wire stripper is the best?

[Tim Brennan]

Hi All,
I had to replace my old automatic wire stripper as I broke it. The replacement unbranded device is the same but it is rubbish. I'm looking at the C.K 495001 Automatic Wire Stripper as a replacement of the replacement.

C.K Automatic Wire Stripper - http://www.screwfix.com/p/c-k-automatic-wire-stripper/97204

Anyone had any experience of the CK tools version or can you recommend another brand?

 

[Pete999]

To be honest and whilst not wishing to knock wire strippers, never owned, used or wanted a pair, if they suit you all well and good, waste of money imo

 

[Joshua]

I've got the CK strippers. I only use them for when I've got loads of downlights to 2nd fix.
they're good but don't buy them from screw fix because you can get them for less than £20 on amazon

Edit: C.K 495001 Automatic Wire Stripper C.K 495001 Automatic Wire Stripper: Amazon.co.uk: DIY & Tools - https://www.amazon.co.uk/dp/B002NZMM9M/ref=cm_sw_r_other_apa_5qD8ybRMXDEW5

 

[Hellmooth]

Ck ones aren't great had 2 sets fail on me, haven't tried any other brands. They are a handy little tool when you've got a lot of stripping to do or sometimes getting into certain cables is easier with the stripper than snips.

 

[Pete999]

This is all you need to strip PVC/PVC Cableshttps://www.amazon.co.uk/s/?ie=UTF8&keywords=ck+electricians+knife&tag=mh0a9-21&index=aps&hvadid=1397287787&hvqmt=e&hvbmt=be&hvdev=c&ref=pd_sl_4953pcpigg_e

 

[The Ghost]

Thomas & Betts Duostrip 200 Cable / Wire Stripper | eBay - http://www.ebay.co.uk/itm/like/311817682247?chn=ps&adgroupid=33676502101&rlsatarget=pla-271883419635&abcId=893836&adtype=pla&merchantid=7180624&poi=&googleloc=1006567&device=c&campaignid=707291931&crdt=0

 

[Pete999]

You know what I reckon? with all these tools for stripping this and that, some one will start courses on cable stripping imagine, "what qualifications have you got the Son" well I'm Part P and cable stripping qualified.

 

[mickfred]

I use ck ones ,would highly recommend. In no way are they a waste of money and I have many tools which are

 

[mickfred]

You know what I reckon? with all these tools for stripping this and that, some one will start courses on cable stripping imagine, "what qualifications have you got the Son" well I'm Part P and cable stripping qualified.

I know what your saying Pete , but for testing at first fix it speeds it up five fold .But yes of course you should be able to strip manual

 

[jackylad]

I've had a pair of the ck strippers must be over 10 years now and still going strong, never used them on t&e mainly flex or alarm cable, they've more than doubled in price, i think i paid 9 quid back then.

 

[GBDamo]

Have a set and they are well worth the money.

once set they will reliably strip very fine alarm cables right up to 6mm. They will strip the outer off 1.5mm flex and the outer off upro 2.5mm T&E all with no further adjustment.

They have taken a good hour of my time for wiring up a heating control panel and associated valves and switch gear, but I am notoriously slow; I prefer thorough.

Been using them heavily for a couple of months now and they're showing no signs of wear but at £20 a set they are paying for themselves on one job.

good addition to anyone's toolbox.

 

[Phil Thompson]

To be honest and whilst not wishing to knock wire strippers, never owned, used or wanted a pair, if they suit you all well and good, waste of money imo

Same here, I personally don't know any sparks who use or even own a set.

Don't know about the ones you linked, but my mate is on at least his fourth set of CK shears approx £20+Vat to my 1 cheap set which where only £8.50 plus Vat in the wholesalers.
His struggle to keep their edge long term and wouldn't get abused. I don't think CK are as good a brand as they were 20 years ago.

 

[Vitesse]

I use these for stripping t&e. Jokari Fkz Automatic Stripper (flat Wires), JOK20030 at D&M Tools - http://www.dm-tools.co.uk/product.php/site/froogle/sn/JOK20030/google/?gclid=CPCPqZj9ptMCFVMo0wodYVsLkA#.WPJXNFTTWhA

Most the time I just use a pair of CK side cutters with the little holes for stripping 1.5 and 2.5.

 

[stummish]

I didn't have a set for years, got some about a year ago and now I wouldn't be without them.

Mine are a set of £9 specials from wholesaler, no brand on them. I looked at them side by side with a set of ck ones an auto electrician friend of mine has and they look identical. I'd bet they were from the same factory.

Strips up to 4mm t&e, and can strip all 3 cores of a 3c&e in one go. Saved a load of time. I'd they break I won't cry at £9 Inc vat either.

 

[ThomasW]

These strippers are brilliant... strip T&E, flex, three core & E, just about anything very easily. I have 3 pairs because I could never be without one... There are other types that strip face on instead of sideways, but I've not used them.