Which holesaw drill bits ?

[shocksl]

I have a normal small drill and a SDS drill .

I need a some holesaw bits . Preferably a little kit with different sizes.

Mainly for ceilings for downlights / spotlights etc

Does anyone recommend any . Some that wont cost an arm or a leg.

Thanks

 

[Electric Magic]

I have a normal small drill and a SDS drill .

I need a some holesaw bits . Preferably a little kit with different sizes.

Mainly for ceilings for downlights / spotlights etc

Does anyone recommend any . Some that wont cost an arm or a leg.

Thanks

These are excellent. They are really quick, stay sharp for ages and it's really easy to get the discs of plasterboard or other material out of them. Definitely worth the initial cost if you're planning on doing a lot of down lights: Starrett KMP11021 General Purpose 11pc TCT MPH Holesaw Kit - PowerToolMate - https://www.powertoolmate.co.uk/powertool-accessories/holesaws-and-accessories/starrett-kmp11021-general-purpose-11pc-tct-mph-holesaw-kit.htm?opt=9052&gad_source=1&gclid=CjwKCAiApsm7BhBZEiwAvIu2XwuqGbx-U7LRwBiyiYDW5F7w9ikZlM7pa6GO7x3w0RY4tTSxhBqQvhoCxSIQAvD_BwE

 

[mainline]

I have a normal small drill and a SDS drill .

I need a some holesaw bits . Preferably a little kit with different sizes.

Mainly for ceilings for downlights / spotlights etc

Does anyone recommend any . Some that wont cost an arm or a leg.

Thanks

16 Pc HOLE SAW KIT SET 19-127mm Circular Round Cutting Sawing Wood Plastic | eBay

The hole saw kit contains 12 of the most common saw blade sizes: 19mm, 22mm, 29mm, 32mm, 38mm, 44mm, 51mm, 64mm, 76mm, 89mm, 102mm, 127mm. Size: 12 hole saw: 19, 22, 29, 32, 38, 44, 51, 64, 76, 89, 102, 127mm.

www.ebay.co.uk

 

[Teddy Lop]

Carbide holesaws are expensive but they're a revelation in drilling. I find the old style with lots of teeth (but still carbide tipped) better suited to ceilings though - the big tooth designs can be quite savage especially in larger sizes (but great and unbelievably fast on wood and other stuff)

I've even changed most of my dont-use-often-enough-to-justify holesaw sizes as once you're acquainted with carbide going back to bimetal or hss is like getting on ryanair after flying concorde

 

[brianmoooore]

I have the set in mainline's link, two other sets similar in design to the normal hole saws we use and a carbide set. Still rarely have the specified size for the downlights I'm fitting.
Don't find the carbide ones to be of any great advantage for just drilling plasterboard, since a HSS one with the teeth almost disappeared will still work OK on that stuff.
The specified hole size for most downlights includes a few mm to clear the fixing springs, so you can usually get away with a hole a few mm smaller than specifies, if you use a padsaw to open out a bit where the springs are.

 

[mainline]

I have the set in mainline's link, two other sets similar in design to the normal hole saws we use and a carbide set. Still rarely have the specified size for the downlights I'm fitting.
Don't find the carbide ones to be of any great advantage for just drilling plasterboard, since a HSS one with the teeth almost disappeared will still work OK on that stuff.
The specified hole size for most downlights includes a few mm to clear the fixing springs, so you can usually get away with a hole a few mm smaller than specifies, if you use a padsaw to open out a bit where the springs are.

I totally agree with you, I've had that type of set for years and as you say not the proper sizes but will do the job at very little outlay and saves using the decent ones.

 

[mainline]

going back to bimetal or hss is like getting on ryanair after flying concorde

Didn't Concorde cost an arm and a leg for tickets and ended up crashing, killing over a 100 people.

 

[HappyHippyDad]

I have a normal small drill and a SDS drill .

I need a some holesaw bits . Preferably a little kit with different sizes.

Mainly for ceilings for downlights / spotlights etc

Does anyone recommend any . Some that wont cost an arm or a leg.

Thanks

You will find this very useful for the ceilings.

Dade Dust and Debris Eliminator

Dade Dust and Debris Eliminator

consumerunitworld.co.uk