Why a PL to this light? | on ElectriciansForums

Discuss Why a PL to this light? in the UK Electrical Forum area at ElectriciansForums.net

HappyHippyDad

-
Esteemed
Arms
Supporter
Joined
Dec 18, 2011
Messages
5,301
Reaction score
6,540
Location
Gloucestershire
Could anyone tell me why there is a PL terminal for this light? Most domestic ceiling roses have a PL block in order to link in and out, but this light actually has a 3 core and earth going to it. This is not domestic, it is going to be a new charity shop.
[ElectriciansForums.net] Why a PL to this light?

[ElectriciansForums.net] Why a PL to this light?
 
So is the emergency light located within the light you see in the picture? I'm guessing it must be, otherwise there would be know point in a PL going to it to charge the battery?
The reason I ask, is because when I switch power off, no emergency light comes on. I also can't see any emergency light. At least not in the same room. Another emergency light in a different room comes on though.
 
Emergency lights will have an LED usually red to indicate charging, and will be heavier due to the battery’s. Some have a remote battery pack that would sit on top of a normal fitting.
the emergency part of the fitting may only light up one of the four tubes.

you’ll have to get into that fitting to see if it’s emergency or not
 
Charge indicators are now green. It may not be an emergency the PL may be floating in the fitting the only way to find out is to remove the diffuser as sometimes the charge indicator can be hidden when someone removes and replaces it. Klix produce ready made plugs and cord sets so maybe they just fitted those everywhere although that would be unusual.
 
Charge indicators are now green. It may not be an emergency the PL may be floating in the fitting the only way to find out is to remove the diffuser as sometimes the charge indicator can be hidden when someone removes and replaces it. Klix produce ready made plugs and cord sets so maybe they just fitted those everywhere although that would be unusual.
I had a man from the council try to tell a client that a red indicator shows a fault and he suggested the client should find a better electrician who would have advised her this was needing replaced! ?
 

Reply to Why a PL to this light? in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
438
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
1K
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

  • Question
Update... I wired up my first heating system today! Thanks to all the help in this thread, (and the initial thread) I was completely prepared...
Replies
6
Views
1K
  • Question
It would normally be the outer terminals where the flex of the pendant drop connect.
Replies
3
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top