Why so big a difference in price? | Page 4 | on ElectriciansForums

Discuss Why so big a difference in price? in the UK Electrical Forum area at ElectriciansForums.net

Joined
Jan 25, 2018
Messages
22
Reaction score
15
Location
Midlands
Hi All,

Just wanted anyone's views on why electricians prices are so different, had a few quotes for wiring in a kitchen, quotes came in at:

ÂŁ1200
ÂŁ950 (reduced to ÂŁ850 when I questioned it)
ÂŁ460

Went with the ÂŁ460, did a great job, safety certificate the lot. I know none of you will have seen the job in question but how do people quote up for jobs and why the vast difference?
 
Just because someone is cheaper doesn’t mean they’ll do a bad job, same as someone expensive doing a good job. Yes in general you do get what you pay for but that price seemed reasonable to me. Don’t you think it says something about the other electrician who dropped £100 once I questioned his pricing? To me that shows a chancer. I bet he pulled up, saw my house on a private estate and put on £200.

I had somebody knock me down in my early days, would never do it again. Put it down to experience and him being a bit over bearing and pushy. Well done for having your house on a private estate by the way.
 
I had somebody knock me down in my early days, would never do it again. Put it down to experience and him being a bit over bearing and pushy. Well done for having your house on a private estate by the way.

I didn’t try and knock him down, after not replying to his quote for a few days he asked if it was too expensive and I said yes then we took £100 off.
 
I had somebody knock me down in my early days, would never do it again. Put it down to experience and him being a bit over bearing and pushy. Well done for having your house on a private estate by the way.

That made me laugh...the thread was going all Joe Pesci versus Spider,in Goodfellas...but you cured it :)
 
Just because someone is cheaper doesn’t mean they’ll do a bad job, same as someone expensive doing a good job. Yes in general you do get what you pay for but that price seemed reasonable to me. Don’t you think it says something about the other electrician who dropped £100 once I questioned his pricing? To me that shows a chancer. I bet he pulled up, saw my house on a private estate and put on £200.
Oh, well, if it's on a private estate that's another thing entirely. You didn't say you were the Duke of Devonshire did you??
 
You get what you pay for...yes...but sometimes you get good value too, even at the mid-range of the market. I can't afford to have my car serviced by the main dealer, it is too old to warrant that "premium service". My mechanic comes to the house (20 miles), drops off his courtesy car and takes mine away, and brings it back when he is satisfied that all is good...and he charges ÂŁ60/hour labour. I'm happy with that, it suits me, and he is a good mechanic.
Paying cash is always a game, and too few people see the catch...
I had a plumber fit a shower pump for me...not a difficult job, but a time-consuming one and it was needed in a hurry and I simply hadn't the time to do it myself. He charged me the shop price for the pump, and again ÂŁ60/hour. He asked if I wanted VAT invoice etc and I said yes, because with an invoice I could set it against the rental income, and I had a comeback if it failed.
Maths: Price for the labour was ÂŁ300 +VAT of ÂŁ60 =ÂŁ360. He said he could "lose" the VAT for cash. Thus, I save ÂŁ60. He however makes ÂŁ300 either way. ÂŁ360 and he pays the vatman ÂŁ60, so pockets ÂŁ300, but minus income tax at 40%, so he nets ÂŁ180. ÂŁ300 cash and he makes, well...ÂŁ300! No tax, no comeback. So, I save ÂŁ60, he saves 3x that, I have no invoice and he has no liability. Therefore, offering to "lose the VAT" is a very poor offer for me...if he wanted cash, he would have to come down to ÂŁ200...he gets ÂŁ200 and I save ÂŁ160...or somewhere in between.
And that is just one of many reasons why prices vary so much.
As an aside, I put in the power supply for the pump and as it's Scotland I didn't part P anyone. However, I did get a proper electrician to do my testing afterwards of that new circuit and the new supply to the smokes...and I was happy to pay him his charge for that.
 
One thing considering the fact you said 6 downlights, I like to use something like JCC which are ÂŁ20-ÂŁ25.00 per fitting, that would be ÂŁ120. But you can get them far cheaper. Also it is a lot to do with perception of the job and estimating labour. I usually put in 20% more labour as experience tells me things never go smoothly. Like, I find out you have insulation in the void above the kitchen which is going to be slightly more work and so on. At ÂŁ35 p.h. (I charge) thats ÂŁ350 with my 20% its ÂŁ420 so thats ÂŁ540 easily. If I was VAT registered then VAT on top. Then there are the other materials like under cupboard lighting, cooker upgrade mats. and so on Maybe ÂŁ100?
You say it is a good job, how do you know it is? Not being challenging just curious.
 
Sounds to me like either you have found a decent guy who undervalues his work, or you have found an unqualified handy man who has a good image and looks with his van etc but has made an absolute mess in areas that you can't see. Most probably and hopefully the first though!
 
I paid the bloke cash, he runs his own business just himself, had a smart van with professional artwork on the side and fully registered.

The kitchen fitter recommend him and said he has worked on many building sites with him. I should think ÂŁ460 for 10 hours work is a decent rate, minus the cabling and downlights he's easy made at least ÂŁ350. ÂŁ35 an hour seems reasonable for an electrician, or is ÂŁ70 or ÂŁ110 a more reasonable rate like the other chancers?

He hasn’t easily made £350 because his overheads, tax and national insurance will need to be taken out of that figure.
 
Sounds to me like either you have found a decent guy who undervalues his work, or you have found an unqualified handy man who has a good image and looks with his van etc but has made an absolute mess in areas that you can't see. Most probably and hopefully the first though!

So an electrician recommended by the fitter who has worked on many building sites and has the following is unqualified?

EAL DOMESTIC INSTALLERS CERTIFICATE
CITY AND GUILDS
PART P
 

Reply to Why so big a difference in price? in the UK Electrical Forum area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
378
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
947
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

I went with a partner. We're able to support each other and take time off knowing the other is at the helm. We split all profit 50/50 whether we...
Replies
12
Views
2K
The challenge that you have with this is that you've no confirmed start point. Because you have a lack of an EICR you don't actually know what...
Replies
7
Views
603

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top