Window shutter installation

evening folks,
Just wanted thoughts on window shutter installation.

To rcd or not?

Fixed appliance and load but potential escape route so leaning towards not, however, t&e on blockwork under dot & dab so less than 50mm.

The shutter controllers are double insulated and smart with WiFi. The suppliers are German and give no direction one way or the other.

Opinions much appreciated.

Thank you.
 
Installation method requires RCD protection.

Edit: Also reliance on electronic devices around escape routes I would suggest should be avoided.
 
There are 13 downstairs shutters. 3x folding patio doors 10x ground floor windows. All could serve as exits.
Surely there is some sort of internal mechanical override for the shutters? Who is installing them would think it would be their problem to ensure building regs were met (if any actually apply) rather than yours.
If it’s domestic you’d be pretty hard up to avoid RCDs without extra protection or something like surface pyro
 
Is this commercial or domestic?
 
Surely there is some sort of internal mechanical override for the shutters? Who is installing them would think it would be their problem to ensure building regs were met (if any actually apply) rather than yours.
If it’s domestic you’d be pretty hard up to avoid RCDs without extra protection or something like surface pyro

The main contractor and client are responsible for the physical installation and, quite rightly so, is not my problem. I've provided the electrickery requested and already included rcd protection but as I've not worked with these products before wanted to check there wasn't another way.
 
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

Advert

YOUR Unread Posts

Advert

Thread statistics

Created
Empire,
Last reply from
PEG,
Replies
13
Views
1,392

Advert

Back
Top