Jazz carne
DIY
I am Uk based: I have brown, blue and black wire on the extractor fan. From the power source I have brown, grey and black wires... please how I connect them to the extractor. All help be great.. thank you
Grey is a line colour unless it is identified otherwise. Neutral can any of the colours under the sun provided it is sleeved/marked with blue.The question is, which should they use?
Grey - that is another phase colour!
Now if only there were a standards organisation that could specify this...
The question is, which should they use?
Grey - that is another phase colour!
Now if only there were a standards organisation that could specify this...
Traditionally core numbers 1 and 2 were used for lives and core number 3 was always used for neutral in this kind of arrangement.
1 being brown (red)
2 being black (yellow)
3 being grey (blue)
So the blue was always used as neutral therefore the logical choice is grey for neutral.
Good point, as it puts the earth between the live pair and the neutral which would lead to better RCD protection against insulation breakdown.
Does anyone know if this is documented in IET docs or in training, etc?