Wiring in a Cooker (Don't Groan)

[Santa]

I am NOT an electrician, and have no intention of doing this myself.

Some months ago, while the floorboards were up for some plumbing, I ran a cable (connected to nothing) from near the main board in the garage, through holes in the joists under the floorboards to the point directly above where I want to fit my new electric cooker. I can't remember the dimensions of the cable, but it's pretty heavy stuff, and what the electrician in the shop where I bought it told me I needed.

My problem is that there is no convenient space adjacent to the cooker housing to put an external socket. There's a hob in the work surface on one side, and to copper pipes belonging to the central heating on the other.

Any suggestions?

 

[trev]

Let your spark decide that one Santa. There may be a necessity for it there may not, it's difficult when you're not there looking at it deciding how to do it

 

[Santa]

Thanks guys - I guess the floorboards will have to stay as they are for the time being. At least I know what to expect.

 

[Geordie Spark]

I have one of those too but with us it's more SWWLTBO

Good lad !! :clap:

 

[SPARTYKUS]

Whats that then? SWMBO Is she who must be obeyed, what the chuff is SWWLTBO

 

[trev]

She who would like to be obeyed

 

[Jimmy Boy]

All that help given and not so much as 'Thanks' button pressed..naughty Santa ! yo ho ho
J

 

[Paul.M]

Thanks guys - I guess the floorboards will have to stay as they are for the time being. At least I know what to expect.

What you could do in your case is to call a local electrician now to look at the cable and its route, he may even take a couple of tests to ensure it hasn't been damaged whilst being installed. Then when your ready call him back to connect up, test and cert. Put your floorboards back down in the mean time.