Working live | Page 4 | on ElectriciansForums

Discuss Working live in the Commercial Electrical Advice area at ElectriciansForums.net

How fat are your fingers @polo1? There's 2" between like and the other! It's certainly fiddly on an I phone, sometimes it takes 5 goes to get it right!
Is that how you spell 'goes'? You judge but careful to not press the dumb button! sausage fingers!

Lol! Have to say I'm still struggling with parts of the "new" site - must be getting to the age where adapting to change is getting more difficult.
PS why are my emojis not appearing in posts?????
 
I had one bad experience with a co-worker while working live on a job. Since then I've worked odd hours on jobs where they wanted me to work live just to avoid it when possible. I typically will only work live if I'm working alone and no one else can complicate the process.
 
I had one bad experience with a co-worker while working live on a job. Since then I've worked odd hours on jobs where they wanted me to work live just to avoid it when possible. I typically will only work live if I'm working alone and no one else can complicate the process.
And if you got a belt that wasn't fatal what next if you are alone?
 
I'm very new to electrical work in the grand scheme of things and iv experienced 1 close encounter fitting a shower pull cord and a multimeter (some of you may have read that post)

It's fair to say that even that fairly large (for my experience) bang and spark scares me and really touched home the reality of electricity. I wouldn't work live unless I felt 100% confident and the right tools/protection. I'm not scared of electricity but I damn well respect it and don't for one Minute think I'm immune to a fatal shock.

You can be as hard as nails with balls of steel until it catches you the wrong way.
 
This goes beyond client contractor having a poke at each other.
There are certain conditions where live working is acceptable but there are very rigorous rules to be observed.
Documentation, RAs, Flash gear, marigolds, 11kV rubber mats
You will find them in the EAWRs 1989 and ESQCR 2002
My advice is to get the HSE to order a stop notice on the contracted work (by not stopping), the client will pass the notice onto Environmental Health dept.
At this point you step back and crack open the pop corn

This is what happens when you don't plan ahead

 
Notice his safety hat wasn't strapped on and fell off. Notice the chaos of the working environment. An accident waiting to happen.
 
Yes isn't it a strange phenomenon, the bigger the hammer the more you hit your thumb :).

Felt sorry for my mate yesterday, thumb just back to normal & no black nail so he's landed. He'd only been showing us 5 minutes before how well it had healed, then the idiot picks up a 16oz ball hammer to whack out a bearing & hits the same thumb.
:confused:.
 

Reply to Working live in the Commercial Electrical Advice area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
381
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
959
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
1K

Similar threads

  • Question
Probably a bit late for the OP, but there's a very easy option if a manual solution is OK. Rotary cam switches are just the ticket - but not the...
Replies
4
Views
695
When I was on the electric board We had a pair of pillocks connect a housing estate to a very large genset, the n lead was in two parts and not...
2
Replies
28
Views
4K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top