Working Quicker

[Hardwired]

After a hiatus of two years working for hourly pay i am back on price work. Do you guys have any tips for working faster? Cheers guys.

 

[Flanders]

Yes planing

 

[Octopus]

Turning up with all the parts, all the tools & a packed lunch!

 

[davesparks]

Allow enough time in your price to do the job with a little bit of contingency on top.
Try to forsee what could go wrong before submitting the price.

Don't forget that working fast is not the same thing as working efficiently!

 

[Deleted member 26818]

Steer clear of price work.

 

[dansk]

As above, don't forget anything, make a list.

 

[IrishSpark]

Dont let your work rate drop whether your on price or hourly work and you wouldn't have that problem!

 

[Dave OCD]

To be really efficient I'd say turn your phone off if you can, avoid site radios which distract and just stay focussed.
The other day I still had a fair bit to do on a job and it was already 3pm - so I got stuck in properly and 2nd fixed 8 double sockets, 6x downlights and 2x 2gang switches in under 2 hours, all done nice and tidy too. It can be done but I don't think you could keep it up all day long.

 

[Hellmooth]

Dave where's your mugshot in the rogues gallery? :hurray:

 

[telectrix]

To be really efficient I'd say turn your phone off if you can, avoid site radios which distract and just stay focussed.
The other day I still had a fair bit to do on a job and it was already 3pm - so I got stuck in properly and 2nd fixed 8 double sockets, 6x downlights and 2x 2gang switches in under 2 hours, all done nice and tidy too. It can be done but I don't think you could keep it up all day long.

and that's obviously allowing for a 30 minute teas/smoke break. if not, why did it take so long?

 

[Lagentium]

Efficiency is key, making sure all tools are with you aswell as gear to do the job, also the correct tools to do the job, I've worked with people who run around like mad men and don't seem to get anything done, just being busy fools. Plan, plan and plan!!

 

[7029 dave]

Apart from all that has been said, if you are good at your job and confidant plus experienced whitch is key, speed normally becomes second nature, but there are plodders in life, that's life.

 

[ipf]

Yes planing

......could be easier on a flat surface, I suppose..

 

[snowhead]

I used to be Quick and Rough, but I've lost most of my speed lately...

 

[R G]

Speed of work is no bad thing , most of all though is careful planning and forethought of whats required for the job in hand with that speed can go hand in hand ,