Ze 108 ohms? | Page 2 | on ElectriciansForums

Discuss Ze 108 ohms? in the Australia area at ElectriciansForums.net

R

RODMan

Ok so

changed a dist board

now i have Zs at soxkets of 108 ohms

any help appreciated

Albert
 
OK

Whats the problem i dont understand ?

can you explain please ?

Mate, we are just trying to establish how your getting a direct measurement of Zs from a socket outlet of 108 ohms, without answering the other simple questions that I asked me or anyone else will probably be unable to help with your problem.
 
Ok: I think before any of us answer any question you might have you need to answer the questions already asked of you.
I've gotta be honest: From what i've read so far i'd say either you have'nt got a clue or your taking the P***.
 
Last edited by a moderator:
So


I did a small course

Can you help or not ?

Ok if you want help then you need to answer the questions that have already been posted before we can give you advice. Why were you checking the Loop ? was there a fault or were you doing FC or a PIR. As for your question of: If we know what we're on about, then yep we do, we all do this for a living.
 
Last edited by a moderator:
If your doing this sort of work you should be competent, if you are competent please answer the questions that we asked,
If your stuck just be honest and describe what you have done in detail and we will try to help.
alternatively get a copy of guidance note 3 as I feel this will be beneficial to you.
 

Reply to Ze 108 ohms? in the Australia area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
300
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
812
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
869

Similar threads

Good to know. Thanks again!
Replies
7
Views
679
Thanks I re tested this morning as I had other bits to finish off . I tested three times and it was 0.30 every time . It may have been my leads...
Replies
7
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top