led

Recent contents Top users
  1. W

    LED Ceiling Light Pulsing

    Hello, I've installed a Monsoon Extractor Fan kit today, all is up and running and everything is working with the exception of the LED. When I switch my lights on the other bathroom lights are working fine but the LED supplied with the fan is pulsing. If you fiddle with the bulb then it stops...
  2. L

    UK - Changing G9 Halogen Bulbs to G9 LED

    Good Morning, I've used this forum for advice many times but this is my first time posting so I hope that this community can help! We're renovating a house and we are looking at replacing all of our existing G9 halogen bulbs in various light fittings with G9 LED's for the obvious reasons...
  3. J

    Updating SMD LED from white to red

    Hello. I’ve been racking my brain all day with this. Here is my situation and question: I have some OEM ambient lights in my vehicle. They are all white, but I want to switch to red LEDs. I determined the are 3528 SMD LEDs, but the rest of the specs are what I need help with. NOTE: My...
  4. H

    100w-150w LED flood light

    I want to buy two of the above for my property. I am on a budget. The property can get battered by driving rain, finding an outdoor LED flood lights isn't the issue but access for maintenance will be. No matter where I look the failure rate for LED flood lights is alarming brand or no brand...
  5. E

    LED Dimmer headaches

    I really need help with this puzzler. First - I am moderately 'skilled' in day-to-day basic wiring. My puzzle: I am trying to replace a single-pole toggle with a dimmer to a recently installed chandelier (4 led candelabra-based bulbs, 5w each, stated on box to be dimmable). The toggle worked...
  6. J

    R7S LED retrofit not working

    Hi all, I am trying to replace my halogen wall uplights (230W, 240V, R7S, 114mm) with LED but so far no luck. I've tried both of the below LEDs but they do not illuminate when the switch is turned on. The halogen bulbs work just fine. Am I missing something? Philips CorePro 17.5W 118mm Dimmable...
  7. 0

    Help modifying simple LED neon sign board

    Good morning guys, I bought this neon sign for my cinema room to put above my arcade machines. I have the cinema controlled by Google voice command so that when I want to watch a movie I say the command and everything downstairs turns on ready. This neon sign has a dimmer inline and it seems...
  8. W

    Can someone recommend me the best RGB LED Strips for my bedroom?

    I am renovating my 6m x 7.6m bedroom, I want to have some LEDs to go around the ceiling and then some around my desk and shelves. Can someone recommend which retailer has the highest-quality LEDs?
    • WillRB
    • Thread
    • bedroom best led led strip led strip lights recommend rgb someone strips
    • Replies: 2
    • Forum: DIY Electrical Advice
  9. S

    Led strip install cost

    I have had three led strips installed under wall units as part of a kitchen refit. A new pattress box was fitted in a stud wall next to an existing switch. Cabling was then fed inside the stud and out of the wall at the bottom then along the floor to the next strip and so on. Not connected as no...
  10. Lambrechts16

    Ceiling fan led lights are flickering/not working

    I bought a ceiling fan with LED lights. After some time the led lights started flashing when I put them on. Now it does not even jump up anymore, only jumps up very weakly or flickers very loudly. The fan function works fine though. How can I fix this?
  11. A

    LED headlight problem

    I can’t get the headlight main beam indicator on my dashboard to work with LED H4 headlight bulbs. The voltage on the return wire is less than 5v - seems the LEDs suck all the power. Even tried using a 6v to 12v DC step up connector but that doesn’t seem to make any difference (maybe a defunct...
  12. T

    Can't find dotless LED lights to fit 18mm x 5mm 5m Skirting groove - HELP!

    I'm converting my garage and have about 15m of skirting being installed which has a groove in it I wish to install a (dotless) RGB led light strip all around but it needs to be smart and controlled via Alexa. Can you tell me if anyone does something which will work for this spec of skirting...
  13. rhartz

    Led strips now red or green colours

    I've fitted some led lights with power supply and mi light controller, they were working fine and all colours could be seen, then for some reason red and green just stopped showing and i can only go white, yellows and blues. I turned it off at the mains and when i turned it back on i changed the...
  14. G

    Solutions for LED inrush current

    I am upgrading garage lighting. I have installed 12 40W batten lights (cheap Amazon variety - don’t have specs). 6A breaker in Garage consumer panel is tripping on inrush current. House consumer panel 32A breaker for garage is also tripping occasionally. Both are type B. No surprises so far...
  15. Mᴀʀᴛʏɴ

    Wanting to add led strip lights under the stairs.

    Wanting to add 2 strips of led lights down each side of underneath of the stairs, I have a socket I can spur off, into a fused switch, been looking at angle profile, so light is better, so ideally I need a LED driver, some led strips, and a way to connect them, happy to wire/solder something...
  16. BitFrosty

    Constant current driver replacement

    Hey folks, i work for a relatively small company, but we are doing some big jobs. And right our headache is taking over outdoor lighting maintenance from other guys (you know that situation where the only way to know anything about light is to get up there on the pole and open it to read that...
  17. Jameskhan111

    Help needed with led light strip

    Hi there, Please can I have some help with the following: I want to have some perimeter lighting in the ceiling which will be using the aluminium profiles that are plastered in. I am going to be using the following: FCOB RGBCCT LED Light Strip 6 Pin 12mm DC24V 960 LEDs RGB CW WW FOB...
  18. mriordan

    LED set-up for 1/12 scaled model display

    I am currently making a scaled model display that uses 16 LED in a series and I would like to wire it up to be on one switch, so I need a single power supply to connect them to. I have various different colors that I would like to use in the display. I have 6 red LED (2.0v), 6 white LED (3.2v)...
  19. M

    LED spotlight question

    Hello. I am in the process of redecorating our bathroom. I ordered some GU10 led spotlights which came with the bulb socket and wiring. For some reason they do not work. They are replacing MR16 bulbs. I've attached photos showing the cable coming out of the ceiling, the old MR16 bulb and the new...
  20. T

    LED indicators fast flashing

    I recently replaced my old bulbs, rear indicators, with these WY21W Amber (585) 7440 (12V-24V) 7* 3030 SMD Canbus LED Bulbs 3000K Car Indicator, Turn Signal Lights, Pack of 2 The hazards still flash at the normal speed, but L / R indicators flash at double the speed of the old bulbs. Is this...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Tags

advice aus cable circuit course earth electric electrical electrician hello led light lighting lights looking new please question rcd socket supply switch testing training wiring
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top