Quick Question - Sockets for appliances

vx35 · Nov 17, 2017

Hi All,

Looking to change all appliances in my house (which is approx 20 years old) and I was wondering if I could change these fuse sockets for normal plug in sockets. Saves me from cutting off the plug on the appliance.

I have a switch grid on the splashback near the hob to switch on/off all appliances so I assume its ok to do so.

[ElectriciansForums.net] Quick Question - Sockets for appliances

telectrix · Nov 17, 2017

no reason why not.

Pete999 · Nov 17, 2017

vx35 said:
Hi All,

Looking to change all appliances in my house (which is approx 20 years old) and I was wondering if I could change these fuse sockets for normal plug in sockets. Saves me from cutting off the plug on the appliance.

I have a switch grid on the splashback near the hob to switch on/off all appliances so I assume its ok to do so.

View attachment 39367

You would need to carry out the safe isolation procedure before beginning any work on any outlet, DON'T just switch it off at the grid switch.
http://www.-----------.co.uk/_documents/bpg2_safe_isolation.pdf

telectrix · Nov 17, 2017

if in doubt, switch off main switch. if you ain't got test gear, plug a table lamp in first, then make sure it goes off.

vx35 · Nov 17, 2017

I generally always switch off at the main switch if I am working on anything electrical in the house, Ive got a tester too

Thanks for the advise.

telectrix · Nov 17, 2017

i sincerely hope your tester is not a neon screwdriver.

Deleted member 26818 · Nov 17, 2017

It could be that the FCUs have been used because plugs would take up too much room, causing the appliances to sit too far forward.

telectrix · Nov 17, 2017

spinlondon said:
It could be that the FCUs have been used because plugs would take up too much room, causing the appliances to sit too far forward.

looking at that waste pipe, should be room for a plug/socket there. dunno about other appliances though.

GeorgeCooke · Nov 19, 2017

Never why people use FCUs like this. Means you (may) need to call a sparks when you replace an appliance.

Wilko · Nov 19, 2017

Hi George and welcome to the Forum.
I understand, but some appliances don't come with plugs and the manufacturer's installation instructions direct us to use an FCU. Sometimes space restrictions may mean there isn't enough room for the plug and the FCU may help.

GeorgeCooke · Nov 20, 2017

Thanks for the welcome.
I thought all appliances had to be fitted with a plug to be sold these days.
If I was a washing machine servicing guy I'd be much happier pulling a plug than removing the fuse from an FCU which could be wired wrongly. Perhaps I'm over cautious.

Wilko · Nov 20, 2017

Agree - it might be a small oven that comes without a plug and an fcu instruction. Unless you can unplug it you must do additional safe isolation tests for exactly that kind of reason.

Quick Question - Sockets for appliances

vx35

-

telectrix

-

Pete999

-

telectrix

-

vx35

-

telectrix

-

Deleted member 26818

telectrix

-

GeorgeCooke

-

Wilko

-

GeorgeCooke

-

Wilko

-

News and Offers from Sponsors

Similar threads

OFFICIAL SPONSORS

YOUR Unread Posts