Fault finding for display not working on water softener | on ElectriciansForums

Discuss Fault finding for display not working on water softener in the DIY Electrical Advice area at ElectriciansForums.net

OllieC

DIY
Joined
Nov 15, 2024
Messages
2
Reaction score
1
Location
brighton
Hi everyone. I'm not sure how this works but if anyone is able to help point me in the right direction that would be great. I've got a Monarch water softener and the display isn't working. When I turn on the power it shows just a blue screen. When I press the buttons I hear a beeping noise and the machine starts regenerating, so clearly power is going to the display in some form. I've checked all the connections and they seem fine. It was working fine a couple of months ago but was unplugged for a bathroom refurb and has been stored safely. So I was wondering how I might fault find to find which part is faulty? I've got a multimeter and the basics of electronics. Monarch charge £144 for an engineer to come out but parts are still covered under warranty so if I can find out what part is at fault then I should get a free replacement. I've attached a couple of pics. Many thanks in advance. Ollie

[ElectriciansForums.net] Fault finding for display not working on water softener

[ElectriciansForums.net] Fault finding for display not working on water softener
 
honestly I think you have 2 choices.
pay the £140 engineer charge
or
send it back to the manufacturer for repair.
check the warrenty documentation and go with what works out best.

you are opening up a whole can of worms by diagnosing it yourself and requesting parts to replace. if it doesn't work, they may well say an unauthorised person has worked on the machine and any further warranty claims are invalid.
 
honestly I think you have 2 choices.
pay the £140 engineer charge
or
send it back to the manufacturer for repair.
check the warrenty documentation and go with what works out best.

you are opening up a whole can of worms by diagnosing it yourself and requesting parts to replace. if it doesn't work, they may well say an unauthorised person has worked on the machine and any further warranty claims are invalid.
Thanks James, you might well be right. I thought it might be as simple as either A or B and maybe swapping over the display, but if in your experience it's not that simple then maybe better just to take the hit and let the experts sort it. Would be good to know if others agree though.
 

Reply to Fault finding for display not working on water softener in the DIY Electrical Advice area at ElectriciansForums.net

News and Offers from Sponsors

  • Article
Join us at electronica 2024 in Munich! Since 1964, electronica has been the premier event for technology enthusiasts and industry professionals...
    • Like
Replies
0
Views
273
  • Sticky
  • Article
Good to know thanks, one can never have enough places to source parts from!
Replies
4
Views
770
  • Article
OFFICIAL SPONSORS These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then...
Replies
0
Views
777

Similar threads

Question 1 do you prefer buttered, salted or sweet salted? I'm guessing salty 😜 1. Auto range multimeter (used on mains before when testing the...
Replies
2
Views
606
  • Question
Thanks. I do a lot more for the site than just change a few alarm batterys. EICRs, PAT, numerous little jobs. Never away from the place.
2
Replies
19
Views
2K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top