Must bond, must bond, must bond. Pointless bonding pictures. | on ElectriciansForums

Discuss Must bond, must bond, must bond. Pointless bonding pictures. in the UK Electrical Forum area at ElectriciansForums.net

GBDamo

-
Arms
Joined
Jun 22, 2016
Messages
1,911
Reaction score
3,015
Location
UK
Must install a 4" piece of copper as any fool knows it's pointless bonding the plastic.



Anyone beat this for a pointless bonding picture.

[ElectriciansForums.net] Must bond, must bond, must bond. Pointless bonding pictures.
 
I remember arguing with a site inspector a few years back, he complained we hadn't put in water bonding in any of the houses. I said there was no point as the incoming pipe was plastic, and the internal plumbing was all plastic, with the exception of about 1' of L shaped copper pipe after the stopcock that was used to stop the plastic pipework flapping about when the stopcock was operated. The rest of the pipework under the sink was plastic to the taps etc. He refused to sign off any of the houses until it was installed. I was not happy at all. In the end we had to install bonding to get the houses passed.
 
It's bad from a plumbing perspective too. It's a 'dead leg' which contributes towards growth of legionella bacteria. Redundant outlets 'should' be fully removed back to the T, and replaced with a straight connector.

A classic example of trying to fix one problem (which wasn't even there) actually introducing another problem.
 
Yes it’s good to see that new build standards are on the up and up..

I mean just look at quality of this installation

Rough as a badgers and that’s being kind
 
If this is indeed a new build...it certainly does nothing for the hope of building properties,in a manner which allows the removal of gas heating,and champions the minimal use of energy...
More likely,Mr,Trump will start to grow his own hair...
 
If this is indeed a new build...it certainly does nothing for the hope of building properties,in a manner which allows the removal of gas heating,and champions the minimal use of energy...
More likely,Mr,Trump will start to grow his own hair...

We used to call them sheds
 

Reply to Must bond, must bond, must bond. Pointless bonding pictures. in the UK Electrical Forum area at ElectriciansForums.net

Similar threads

  • Question
Any metalwork connected to the MET could rise in voltage compared to true earth under an open supply neutral fault (on TN-C-S), and that would...
2
Replies
24
Views
2K
Yes the first bit is just standard wiring, TNS lead cable into cut-out, cut-out to meter, meter to DP isolator, top of isolator is sealed as per...
Replies
8
Views
1K

Recommended Sponsor News

Exclusive Forum Offer! Free euro 2024 wall chart for first 10 responses!

Hi everyone,

We have 10 exclusive Uheat EURO 2024 Wallcharts to giveaway for Electricians Forum Members! The first 10 people to reply YES to this thread - I will message and get them sent out to you just in time for this years tournament! GO GO GO

Quickwire Now Sponsor ElectriciansForums.net

I am sure you will join me in welcoming our newest sponsors of ElectriciansForums.net - Quickwire! They have decided to join us after seeing you guys discussing their products here. Now we have an expert on board that you can chat to @Quickwire-Sam who will be happy to answer your queries!

[ElectriciansForums.net] Quickwire Now Sponsor ElectriciansForums.net


@Quickwire-Sam said "At Quickwire, we're all about speed, safety, and reliability. We're a family-run business, and every Quickwire connector is proudly made right here in the UK, ensuring noticeable quality. In short, Quickwire is the fastest connection method on the market. Whether you're an experienced electrician or a DIY enthusiast, Quickwire makes electrical connections ridiculously quick and easy. We're passionate about blending British craftsmanship with innovation. If you have any questions or if there's any way we can help, please just ask me!"

PCBWay Now Sponsor ElectriciansForums.net!!

I hope you will all join me in welcoming our newest sponsor to the forum PCBWay! You can contact their friendly people by sending a message to @PCBWay who will be happy to answer your queries.

Welcome to the community and thanks for your sponsorship!

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

PCBWay provides services including PCB Prototype and batch Production, PCB Assembly (SMT), 3D Printing, CNC Machining, PCB Design, Electronics Modules Selling, etc. We are committed to meeting the needs of global makers from different industries in terms of quality, delivery, cost-effectiveness, and any other demanding requests in electronics.

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top