Dodgy trade pictures for your amusement! - 1 Million Views!

Darkwood · Mar 21, 2015

Right ... Just been nudged to set this up by Paul.M and sounds a good idea following recent threads I've done in the Arms..

Rules....No Offensive material... edit if required before posting as this is the public arena.
Anything to do with the trade or in and around it ...H&S pic's welcome.

[ElectriciansForums.net] Dodgy trade pictures for your amusement! - 1 Million Views!

I've posted this a few times and this is at a mates house following a kitchen refirb several yrs ago.

mg_smile:

Raptor0014 · Jul 8, 2022

Inspection I’m doing currently for the council. The landlord was illegally using place as a HMO, so has decided to put it out for normal rent as the council threatened to fine him. Apparently his usual ‘electrician’ has had a look at the installation prior to me and said it was fine

. Council have asked me to come look at it. Council woman and landlord were here earlier and I showed them some issues and said if the other guy wants to put his name to a certificate to say the place is fine in that condition then on his head be it. I think landlord is upset as so far his remedial bill is sat at just over £1k!

Guess they didn't understand the requirement for the edge of Zone 2 being 600mm

Apparently this is fine as it still works and it's just 'a bit of cracked/melted plastic'

Obviously the CU isn't on whilst I'm doing this!

This is barely clamped in and it's literally holding about 2mm of conductor.

mainline · Jul 8, 2022

Raptor0014 said:
Inspection I’m doing currently for the council. The landlord was illegally using place as a HMO, so has decided to put it out for normal rent as the council threatened to fine him. Apparently his usual ‘electrician’ has had a look at the installation prior to me and said it was fine . Council have asked me to come look at it. Council woman and landlord were here earlier and I showed them some issues and said if the other guy wants to put his name to a certificate to say the place is fine in that condition then on his head be it. I think landlord is upset as so far his remedial bill is sat at just over £1k!

View attachment 99259
Guess they didn't understand the requirement for the edge of Zone 2 being 600mm
View attachment 99260
Apparently this is fine as it still works and it's just 'a bit of cracked/melted plastic'

View attachment 99261 View attachment 99262
Obviously the CU isn't on whilst I'm doing this!

View attachment 99263 View attachment 99264 View attachment 99265 View attachment 99266 View attachment 99267 View attachment 99268
This is barely clamped in and it's literally holding about 2mm of conductor.

Are they mixed manufacturer mcbs ?
What's the fused spur feeding ?

I'm just being curious, but if you message me the landlords number I'll put a quote in

Raptor0014 · Jul 8, 2022

mainline said:
Are they mixed manufacturer mcbs ?
What's the fused spur feeding ?

I'm just being curious, but if you message me the landlords number I'll put a quote in

Yep two different MCB (Hager and Europa).

Spur is feeding the doorbell chime next to it and another one in the room next door. Hence the two cables coming out of it. Took me a bit to trace where the second cable was going.

mainline · Jul 8, 2022

Raptor0014 said:
Yep two different MCB (Hager and Europa).

Spur is feeding the doorbell chime next to it and another one in the room next door. Hence the two cables coming out of it. Took me a bit to trace where the second cable was going.

I assume it's a having a Cu change.

Looks like bad work has caused most of the damage, never mind, keeps the work flowing

Raptor0014 · Jul 8, 2022

mainline said:
I assume it's a having a Cu change.

Looks like bad work has caused most of the damage, never mind, keeps the work flowing

That’s what I’ve quoted for along with a few other bits.

But the woman from the council said the landlord seems to think rules don’t apply to him.

It wouldn’t surprise me if he pulls it then rents the place under the radar. Probably as a HMO again.

mainline · Jul 8, 2022

Raptor0014 said:
That’s what I’ve quoted for along with a few other bits.

But the woman from the council said the landlord seems to think rules don’t apply to him.

It wouldn’t surprise me if he pulls it then rents the place under the radar. Probably as a HMO again.

Or gets his drive by matey to do it.

James · Jul 8, 2022

Raptor0014 said:
That’s what I’ve quoted for along with a few other bits.

But the woman from the council said the landlord seems to think rules don’t apply to him.

It wouldn’t surprise me if he pulls it then rents the place under the radar. Probably as a HMO again.

Caution, he may not be in a hurry to pay for any work he thinks is not necessary as he is above the law.

Raptor0014 · Jul 8, 2022

James said:
Caution, he may not be in a hurry to pay for any work he thinks is not necessary as he is above the law.

As it’s over £1k I told the council & landlord I won’t even order the materials until I have the 50% deposit.

It’s on all my quotes that any orders over £1k a 50% deposit is required to confirm the booking.

At least that way I have him by the balls if I need as by him paying the 50% deposit he would have agreed to the T&Cs that says remainder on completion within 7 calendar days. So if he doesn’t pay then I’ll jump through the legal hoops as necessary to get the rest.

pc1966 · Jul 9, 2022

A friend of min is taking over a former bank premise for her charity work so I went for a quick walk round to see it and spotted this:

Taylortwocities · Jul 9, 2022

pc1966 said:
A friend of min is taking over a former bank premise for her charity work so I went for a quick walk round to see it and spotted this:
View attachment 99291

At least you can find the switch when thd light is off!
In fact, that’s how I wire the (FCU) light switches in my sheds. Then I can find them in the dark.

Mike Johnson · Jul 9, 2022

Oh min (Kenneth Williams)

GBDamo · Jul 9, 2022

Turned up on site after a week away, to allow other trades to catch up, and the alarm/data monkies had been in.

Needles to say I was a little apoplectic, put my phone away, went for a coffee and then put it as right as I could.

There is an entirely new circle of hell waiting for these cretins.

My favourite, that now makes me chuckle, is the cut up grommets in the top of the fire alarm panel, plastic, but don't bother with the holes in the galv trunking, mind boggling.

westward10 · Jul 9, 2022

They've only put one sounder circuit in. Rough doesn't begin to describe it.
They are both on switch spurs, bit of flex as mains for the fire alarm.

GBDamo · Jul 9, 2022

pc1966 said:
A friend of min is taking over a former bank premise for her charity work so I went for a quick walk round to see it and spotted this:
View attachment 99291

Why do these always take me an age to find the fault?

UNG · Jul 9, 2022

GBDamo said:
Turned up on site after a week away, to allow other trades to catch up, and the alarm/data monkies had been in.

View attachment 99301
View attachment 99297 View attachment 99299

Needles to say I was a little apoplectic, put my phone away, went for a coffee and then put it as right as I could.

View attachment 99298 View attachment 99302 View attachment 99303

There is an entirely new circle of hell waiting for these cretins.

My favourite, that now makes me chuckle, is the cut up grommets in the top of the fire alarm panel, plastic, but don't bother with the holes in the galv trunking, mind boggling.

Not sure I'd be putting other trades screwed up cabling right unless I was charging them fir it