Level 2 electrical installation course | on ElectriciansForums

Discuss Level 2 electrical installation course in the Electrician Courses : Electrical Quals area at ElectriciansForums.net

Matter

DIY
Joined
Aug 27, 2022
Messages
43
Reaction score
0
Location
West Yorkshire
Is this course worthwhile doing to gain electrical knowledge? Has anyone studied it before? Level 2 electrical installation
 

Attachments

  • [ElectriciansForums.net] Level 2 electrical installation course
    Screenshot_2022-08-28-17-38-56-86_40deb401b9ffe8e1df2f1cc5ba480b12.jpg
    166.3 KB · Views: 8
So the college told me the same. Level 2 on its own isn't much good. I would need level 3 a 2 year course that I maybe able to get funding for. And then I would need to do the NVQ I think I could get the site evidence for that as I know a few electrians. Would the NVQ only be a year after completing the electrical installation level 3. Thanka
 
Upvote 0
Depends what you want to do. Most employers don't recognise these qualifications so after 2 years of study you would be expected to work for mates/apprentices wages while you build up real life experience.

I did level 2 at college and it was a waste of time in terms of gaining knowledge and experience. The other kids were passing and didn't know what an MCB was.
 
Upvote 0
Depends what you want to do. Most employers don't recognise these qualifications so after 2 years of study you would be expected to work for mates/apprentices wages while you build up real life experience.

I did level 2 at college and it was a waste of time in terms of gaining knowledge and experience. The other kids were passing and didn't know what an MCB was.
Thanks so how did you get your qualifications?
 
Upvote 0
So would be hard to achieve this on an evening doing the level 2 and 3 diapolmas
Get out there as a 'mate' and start earning half decent money.

Level 2 and 3 at college is gonna cost you 2 years of your life (at least - when the pandemic hit some colleges were put back by 1 or 2 years and some even more - i know lads who started in 2017 and still haven't finished due to that and other problems with staffing, supplies, equipment etc.) and several thousand pounds. Then when you have level 2 and 3 you're not considered qualified by anyone and will be on mate's money anyway.

Then there's the fact that college doesn't actually teach you anything about being a real life spark and only teaches you book-electrics.

Personally i wouldn't go that route and would try to get into the industry another way.

If i were in your shoes i'd go get the BS7671 regs book, copy of the on-site guide and the 'guidance note 3' and go pass your 18th edition. Then get an ECS/CSCS card and the world will open up to you.
 
Upvote 0
Get out there as a 'mate' and start earning half decent money.

Level 2 and 3 at college is gonna cost you 2 years of your life (at least - when the pandemic hit some colleges were put back by 1 or 2 years and some even more - i know lads who started in 2017 and still haven't finished due to that and other problems with staffing, supplies, equipment etc.) and several thousand pounds. Then when you have level 2 and 3 you're not considered qualified by anyone and will be on mate's money anyway.

Then there's the fact that college doesn't actually teach you anything about being a real life spark and only teaches you book-electrics.

Personally i wouldn't go that route and would try to get into the industry another way.

If i were in your shoes i'd go get the BS7671 regs book, copy of the on-site guide and the 'guidance note 3' and go pass your 18th edition. Then get an ECS/CSCS card and the world will open up to you.
Thanks my position is in a plumber/gas engineer wanting to diversify.
 
Upvote 0
Get out there as a 'mate' and start earning half decent money.

Level 2 and 3 at college is gonna cost you 2 years of your life (at least - when the pandemic hit some colleges were put back by 1 or 2 years and some even more - i know lads who started in 2017 and still haven't finished due to that and other problems with staffing, supplies, equipment etc.) and several thousand pounds. Then when you have level 2 and 3 you're not considered qualified by anyone and will be on mate's money anyway.

Then there's the fact that college doesn't actually teach you anything about being a real life spark and only teaches you book-electrics.

Personally i wouldn't go that route and would try to get into the industry another way.

If i were in your shoes i'd go get the BS7671 regs book, copy of the on-site guide and the 'guidance note 3' and go pass your 18th edition. Then get an ECS/CSCS card and the world will open up to you.
Can you get an electrical cscs card with the 18th edition. Or do you mean a general cscs card
 
Upvote 0
One of the issues is that my local colleges offer the level 2 electrical installation diapolma. But known seem to offer the level 3. I feel I could possibly get evidence for my nvq onsite with the electrians I know. But why does no where seem to offer the level 3 diapolma in electrics. Just online training places and able skills. I live in Halifax near leeds
 
Upvote 0
Working on the job gives a lot of practical experience enabling you to wire all sorts of installations.But without the theory of why your doing it then you'll never progress enough to be fully qualified and could end up doing a dangerous install due to the lack of knowledge of the theory side of things.
 
Upvote 0
Not nonsense at all, an apprenticeship, formal or informal, is necessary.
Absolutely, provably, 100% false. Unless you're trying to make 'apprenticeship' an umbrella term that means 'learning from anyone else in any capacity'. In which case everyone does an apprenticeship in absolutely every discipline.

This guy is asking how to get into the biz and you're telling him he needs an apprenticeship. Wrong. Utter nonsense as you would say.
 
Upvote 0

Reply to Level 2 electrical installation course in the Electrician Courses : Electrical Quals area at ElectriciansForums.net

Similar Threads

  • Question
Oh so it's them setup again with a new name is it! Sounds as dodgy as the ones we used to get 10 years ago. Let's see them try gey legals on...
Replies
12
Views
639
  • Question
As MDJ said, getting a trade was the best bit of advice my Dad ever gave me, Once time served I kept studying and got a HNC which enabled me to go...
Replies
2
Views
426
  • Question
Oh nice that's Swindon massive site is great ! I doubt my college will provide me with City and Guilds 2365 level 3.... their rubbish like that...
Replies
3
Views
383
  • Question
I did the homestudy level 2 and level 3. You're on premesis for 4 weeks for level 2 and 3 1/2 weeks for level 3 broken up over the time you take...
Replies
3
Views
362
  • Question
Everything was fitted, sockets, light, switches, trunking cover, the lot.
Replies
15
Views
1K

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

Electrical Courses

This is the main Electrical Courses at ElectriciansForums.net. Find local recommended electricians courses. Avoid training "company" scams. Always go view the training centre before booking any electrical courses.
This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock    No Thanks