Fuse box installed for £150 what!!!

pennywise · Nov 1, 2011

Took me an hour to find the job :stuart:

hercule · Nov 1, 2011

It's taken me over a day to find the £45 wylex - and I'm still looking...

Kiers1970 · Nov 1, 2011

took me less than an hour as I hadn't took an hour off my watch.

Paul.M · Nov 1, 2011

Took me 2 mins to find out that the apprentice forgot to 2nd fix a socket behind the sofa and 5 mins to install. A ten mins talking to the apprentice took us in total 17 mins! Could have done half a cu change by then

.

Mark_Burgess · Nov 1, 2011

After reading this lot, I am on par with Telectrix regards time and cost.

Anyone can make a pretty looking new installation consumer unit, I have yet to come across an old consumer unit change, with over 6 ways where the cables are long enough and all CPCs are there to make a neat job.

£150 for a new CU installed? no thanks I have better things to do.

I am glad I dont live near the OP James the spark, up against someone advertising those rates and being asked if I could do it cheaper or the same, might as well turn the phone off!

SPARTYKUS · Nov 1, 2011

.....as per last 7 or 8 comments ..... see what I mean ...must be a wind up

Dan23584 · Nov 1, 2011

If his aim was for a wind up then looking at the length of this thread he has succeeded with top marks! You cant read it all in 21mins!

SPARTYKUS · Nov 1, 2011

come on vernam616 come clean.

I've always enjoyed your posts thus far, this thread seems to have taken a strange tack ...?

whats the deal my fine fellow?

hercule · Nov 1, 2011

I'd be on my testing by 21 minutes!

Dcf · Nov 1, 2011

for decent size board i allow a day to fit and test.guarantee ill find a james hunt of a neutral earth fault on most jobs n all.
last hager +mcbs and rcbos came to well over 150 on its own never mind any labour, tails etc.150 quid is 1986 prices.thats a right tight price you have set yourself there tho. i.e. rockbottom.

Paul.M · Nov 1, 2011

Ha ha ha, it must be a wind up.

Tomorrow I'm finishing off a house rewire. House is occupied by disabled children so haven't been able to have any circuits off at any length off time due to tv, computers etc + it was half term last week.

Anyway I've got the house running from the old and new cu, (only one circuit on the new BTW). I'll time myself on how long it takes on the 'power off day' to install another 7 circuits into a new board, dead test, power up, test, cover on and explain about an RCD to the parents. Erm I'm thinking 45 mins should do it

.

Phil · Nov 1, 2011

even if i could do a cu change in twenty minutes properly there is no way i would, its bad enough trying to extract cash out of some of them when you have been there a few hours let alone 30 minutes including putting the tools away.

Goody · Nov 1, 2011

I am replacing a fuse-board with 10 way Wylex board this Saturday and I have quoted them £375.00; no one squabbled. It’s a three bed house converted into two flats and it has all the markings of a DIY’er showing his wiring skills. God know, how long I am going to be there tracing back the cables.

[ElectriciansForums.net] Fuse box installed for £150 what!!!

Could this be done for £150.00? I doubt it! :stuart:

Paul.M · Nov 1, 2011

Goody said:
I am replacing a fuse-board with 10 way Wylex board this Saturday and I have quoted them £375.00; no one squabbled. It’s a three bed house converted into two flats and it has all the markings of a DIY’er showing his wiring skills. God know, how long I am going to be there tracing back the cables.

View attachment 8561

Could this be done for £150.00? I doubt it! :stuart:

I'll do it for £149.99!

Sorry thought I was on my hammer dot com

.

R.J.C. · Nov 1, 2011

Nice looking neat job I have to agree. Whats happened to the 2nd RCD?

Fuse box installed for £150 what!!!

pennywise

hercule

-

Kiers1970

Paul.M

-

Mark_Burgess

SPARTYKUS

Dan23584

-

SPARTYKUS

hercule

-

Dcf

Paul.M

-

Phil

Goody

-

Paul.M

-

R.J.C.

-

News and Offers from Sponsors

Similar threads

OFFICIAL SPONSORS

YOUR Unread Posts