Customer not paying, hanged up on me. | Page 2 | on ElectriciansForums

Discuss Customer not paying, hanged up on me. in the UK Electrical Forum area at ElectriciansForums.net

E

electricshock

Hi, everyone. If this is in wrong section, please move.

I need advice on what I should do.

Basically I installed a 4 core 25mm, 20 meters swa cable for a shop. The run was from a 3 phase supply to a single phase shop. The other 2 phases were being used for shops next door.

As this was a emergency job as the old cable was buried in Wall and had been damaged somewhere. I quickly installed the cable so the tenant can get electric in his shop.

Originally the landlord called and asked me to sort it out. We have been working for him a number of years now and everything was fine.

After doing the job, the landlord tells us to get money from tenant. So now tenant saying it's landlord responsibility and landlord saying it's tenant responsibility. I am now stuck in the middle. The landlord is now just boycotting me. Hanged up on me.

Getting straight to the point, I don't want to get into who's responsibility it is. All I want to know is what can I do. I had a verbal agreement with landlord, no signed document. I have sent invoice to landlord address.

Should I do small claims against landlord?

Can I take my cable off as it is wired on the outside and most of the cable is fixed onto next door shops back wall?

What would you advise?

Please let me know if you need more detail.

Thank you in advance
 
no need to remove SWA. just give it a few well placed whacks with one of these bad boys.


[ElectriciansForums.net] Customer not paying,  hanged up on me.
 
Hi, everyone. If this is in wrong section, please move.

I need advice on what I should do.

Basically I installed a 4 core 25mm, 20 meters swa cable for a shop. The run was from a 3 phase supply to a single phase shop. The other 2 phases were being used for shops next door.

As this was a emergency job as the old cable was buried in Wall and had been damaged somewhere. I quickly installed the cable so the tenant can get electric in his shop.

Originally the landlord called and asked me to sort it out. We have been working for him a number of years now and everything was fine.

After doing the job, the landlord tells us to get money from tenant. So now tenant saying it's landlord responsibility and landlord saying it's tenant responsibility. I am now stuck in the middle. The landlord is now just boycotting me. Hanged up on me.

Getting straight to the point, I don't want to get into who's responsibility it is. All I want to know is what can I do. I had a verbal agreement with landlord, no signed document. I have sent invoice to landlord address.

Should I do small claims against landlord?

Can I take my cable off as it is wired on the outside and most of the cable is fixed onto next door shops back wall?

What would you advise?

Please let me know if you need more detail.

Thank you in advance

Template LBA (letter before action) here: https://www.google.co.uk/search?cli...efore+action&sourceid=opera&ie=UTF-8&oe=UTF-8

LOTS of them in fact!!
 
What's the worse that can happen if I take the cable out. Bearing in mind that I don't need to enter the shop and the back gate is always open. So I would be like in and out.
You will end up with a load of armoured unpaid for and a possible prosecution, stick with being professional and stop acting like a fool. You either want your money or you want to look cool here, make your mind up, if you want professional advice then great, if not please do not waste our time.
 
I don't want too look cool. I just don't like the fact that the landlord is renting shop without paying for my service which he is not paying for. I send the letters out first.
Well were on your side, no one likes a fella to be ripped off, do the letter and send another invoice, then you will have grounds to move to the next step, even if that is ripping it out, don't leave yourself open to anything which may incriminate you.
 

Reply to Customer not paying, hanged up on me. in the UK Electrical Forum area at ElectriciansForums.net

Similar threads

  • Question
Happens on every job of ours, houses are usually empty for a year or so and they are always £300-£400 in debt mostly due to the standing charge...
    • Like
Replies
11
Views
889
  • Question
much more information required. Is the supply to the first building a DNO supply or a sub main cable from another building ? if it is a sub main...
Replies
5
Views
914

Recommended Sponsor News

Exclusive Forum Offer! Free euro 2024 wall chart for first 10 responses!

Hi everyone,

We have 10 exclusive Uheat EURO 2024 Wallcharts to giveaway for Electricians Forum Members! The first 10 people to reply YES to this thread - I will message and get them sent out to you just in time for this years tournament! GO GO GO

Quickwire Now Sponsor ElectriciansForums.net

I am sure you will join me in welcoming our newest sponsors of ElectriciansForums.net - Quickwire! They have decided to join us after seeing you guys discussing their products here. Now we have an expert on board that you can chat to @Quickwire-Sam who will be happy to answer your queries!

[ElectriciansForums.net] Quickwire Now Sponsor ElectriciansForums.net


@Quickwire-Sam said "At Quickwire, we're all about speed, safety, and reliability. We're a family-run business, and every Quickwire connector is proudly made right here in the UK, ensuring noticeable quality. In short, Quickwire is the fastest connection method on the market. Whether you're an experienced electrician or a DIY enthusiast, Quickwire makes electrical connections ridiculously quick and easy. We're passionate about blending British craftsmanship with innovation. If you have any questions or if there's any way we can help, please just ask me!"

PCBWay Now Sponsor ElectriciansForums.net!!

I hope you will all join me in welcoming our newest sponsor to the forum PCBWay! You can contact their friendly people by sending a message to @PCBWay who will be happy to answer your queries.

Welcome to the community and thanks for your sponsorship!

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

PCBWay provides services including PCB Prototype and batch Production, PCB Assembly (SMT), 3D Printing, CNC Machining, PCB Design, Electronics Modules Selling, etc. We are committed to meeting the needs of global makers from different industries in terms of quality, delivery, cost-effectiveness, and any other demanding requests in electronics.

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top