Shower very near fuse board! | Page 3 | on ElectriciansForums

Discuss Shower very near fuse board! in the UK Electrical Forum area at ElectriciansForums.net

SSE

-
Joined
Apr 20, 2010
Messages
407
Reaction score
22
Ok here's the scenario. Woman I know has a garage joined on to her house, she's went & put up a partition so that the garage is split in two as one room is now going to be a room used for a dog grooming business. In the room for the dog grooming she has a shower installed on one wall........the same wall as the garage fuse board about 1.5m away! I've tried explaining to her that the mains board will need repositioned into the garage room adjacent to the room where the shower is, she's having none of it though! The fuse board was fitted to the bare block wall but has now been strapped out & sheeted, so it's basically flush with the plasterboard. I've tried explaining to her why it can't stay there. The shower is just on the wall, no shower screen etc & how dangerous it could be washing struggling dogs with the shower head & fuse board basically right beside the shower!! Her latest idea is that she will sheet over the fuse board with ply wood, I've explained how this won't be adequately protected from splashes etc... Can someone please point me in the right direction for where I can show her in the regs book that it can't stay there.
 
The OP admitted he couldn't be bothered to reference to BS7671, now tell me that is the right attitude to have in this job. If he had said he had looked and couldn't find anything to back his case either way then say so. Being plain lazy just makes me think what a buffoon.
Careful M8 a couple of the Forum trolls and big girls blouses won't like your comments, your right of course, there is no excuse for an electrician to not know where section 7 is or what a regs book looks like if carrying out Domestic installation work or indeed any electrical installation work, Trouble is the poofs here are getting their knickers in a twist everytime something is said which isn't all flowers and puppy dogs and the site is starting to turn into a massage parlour now.
 
Id rather it turn into a brothel to be honest, or at least one of the 'massage parlors' that offers extra services...
Too true I agree with you lol, however I am expecting one or two of the pansies here to start asking questions about knitting rather than electricity issues, It is like walking on broken glass in here now, ridiculous. Electricity, you cannot see it, you cannot hear it and you cannot smell it, a very dangerous but wonderful discovery, yet when 14 or 15 year experienced sparks ask ridiculous questions the pansies defend any bashing they get. DIYers and Trainees ask silly questions, sparks should ask for second opinions, I think Dan should change the colour of the forum to pink, some members will feel right at home.
 
Too true I agree with you lol, however I am expecting one or two of the pansies here to start asking questions about knitting rather than electricity issues, It is like walking on broken glass in here now, ridiculous. Electricity, you cannot see it, you cannot hear it and you cannot smell it, a very dangerous but wonderful discovery, yet when 14 or 15 year experienced sparks ask ridiculous questions the pansies defend any bashing they get. DIYers and Trainees ask silly questions, sparks should ask for second opinions, I think Dan should change the colour of the forum to pink, some members will feel right at home.

What like the thread last week " what hand cream do you use"
PMSL
 
5. None of this is any excuse for being obnoxious to people in a way you wouldn't dream of being face to face. I don't understand what drives people to be foul to other people just because they think they can get away with it because it's online. It just doesn't achieve anything. I mean take the mickey a bit by all means but nastiness is not called for.

Balls !! It's not about being online. If another spark asked me in person some of the questions asked on here, I would be a lot less polite than I am on here.
I personally don't post as often in threads like this, but practicing electricians who don't know their job should expect short shrift.
 
That was said in strict confidence to you, I didnt expect you to blab it out on an open forum that i have difficulty blowing it up ......
Here borrow one of Mine
 

Attachments

  • [ElectriciansForums.net] Shower very near fuse board!
    1900116_850287954986585_2067304879_n.jpg
    23.3 KB · Views: 65
God i love these threads :hurray:
 

Reply to Shower very near fuse board! in the UK Electrical Forum area at ElectriciansForums.net

Similar threads

  • Question
Hi I'm again struggling with a long overdue 2396 project but, as before, am at a standstill when it comes to the lighting design. Please could...
Replies
0
Views
626

Recommended Sponsor News

Exclusive Forum Offer! Free euro 2024 wall chart for first 10 responses!

Hi everyone,

We have 10 exclusive Uheat EURO 2024 Wallcharts to giveaway for Electricians Forum Members! The first 10 people to reply YES to this thread - I will message and get them sent out to you just in time for this years tournament! GO GO GO

Quickwire Now Sponsor ElectriciansForums.net

I am sure you will join me in welcoming our newest sponsors of ElectriciansForums.net - Quickwire! They have decided to join us after seeing you guys discussing their products here. Now we have an expert on board that you can chat to @Quickwire-Sam who will be happy to answer your queries!

[ElectriciansForums.net] Quickwire Now Sponsor ElectriciansForums.net


@Quickwire-Sam said "At Quickwire, we're all about speed, safety, and reliability. We're a family-run business, and every Quickwire connector is proudly made right here in the UK, ensuring noticeable quality. In short, Quickwire is the fastest connection method on the market. Whether you're an experienced electrician or a DIY enthusiast, Quickwire makes electrical connections ridiculously quick and easy. We're passionate about blending British craftsmanship with innovation. If you have any questions or if there's any way we can help, please just ask me!"

PCBWay Now Sponsor ElectriciansForums.net!!

I hope you will all join me in welcoming our newest sponsor to the forum PCBWay! You can contact their friendly people by sending a message to @PCBWay who will be happy to answer your queries.

Welcome to the community and thanks for your sponsorship!

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

PCBWay provides services including PCB Prototype and batch Production, PCB Assembly (SMT), 3D Printing, CNC Machining, PCB Design, Electronics Modules Selling, etc. We are committed to meeting the needs of global makers from different industries in terms of quality, delivery, cost-effectiveness, and any other demanding requests in electronics.

[ElectriciansForums.net] PCBWay Now Sponsor ElectriciansForums.net!!

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top