LED Lighting | Page 4

LED Lighting

LED Lighting
https://ads.google.com/intl/en_uk/start/overview-adon/?subid=gb-en-adon-aw-oth-c-bau!o3~389450322~573810899~206022853~OPTID-6839409&utm_source=fb-d...
Replies
0
Views
112
  • Question
This controller might do the job if you have single colour strip. You'll still need a power supply prior to this! Lots of additional features you...
Replies
3
Views
309
I generally thought double stack boards were more for situations where a portrait design is better suited to the cupboard - you still generally...
Replies
4
Views
433
Dead testing should prove that your earthing is in good condition before proceeding to live testing.
Replies
1
Views
209
In my opinion that is incorrect as the cpc could be broken but parallel paths may not suggest this. From previous threads you clearly have issues...
Replies
3
Views
221
  • Question
In the U.K., depending on cable type and routing, an rcd may not be required
Replies
3
Views
208
  • Question
If you don't match the load to the output impedance requirement of the amplifier you won't get maximum power transfer to the load. You have...
Replies
1
Views
172
You would have to say internal.
Replies
5
Views
320
M
View: https://youtu.be/VH_-sT3zwus?feature=shared
Replies
1
Views
118
Every oil boiler I've worked on has used a photocell for flame detection. Even though your boiler is inefficient by current standards, as long as...
Replies
4
Views
377
thank you so much. that worked out. i ended up shorting the live switch and sparks flew, but i recovered and its all working now. :)
Replies
3
Views
247
  • Question
if you wanna installed second lighting included existing switch, that way is allowable.
Replies
1
Views
208
Hi Dave Run a heavy wire from the Driver and down the corner of the cabinet, then solder on a smaller "t intersections of wire to the LED strip...
Replies
3
Views
581
It depends very much on what RCD you are using, or even If you are using one. For example, if the RCD is 500mA then a max Ra of 100ohms is classed...
Replies
2
Views
221
  • Question
Try using the switch You can try the Touchdim function, remove the dimmer switch and use a retractive switch, like a bell switch to control the...
Replies
1
Views
212
Hi, Unless you use unswitched sockets, there may not be much you can do unless you add something inline. A lot of the voice (alexa, apple...
Replies
3
Views
239
Thank you, found it 👍
Replies
3
Views
229
  • Question
thanks for the reply mate, I am currently working with a qualified electrician gaining experience been like 5 months with him now all domestic.
    • Like
Replies
3
Views
572
Evening all, Just after a sense-check before I commit & send the quote. I’ve been asked to run in an SWA to feed a small CU that’ll sit inside...
Replies
0
Views
135
T
Not sure how these things operate, but I expect a limit switch near each extreme position to tell the motor to stop. Have you got a wiring...
Replies
1
Views
163
My understanding is it's not necessary unless compromising a fire barrier. Hager instructions: Cable Access: Cable access into the metal...
    • Like
Replies
1
Views
181
I was considering that, however the loft isn't boarded, not exactly the lightest 🤣 I was hoping I wouldn't have to do that but maybe that's the...
Replies
2
Views
179
Good question now to start with thermosetting insulated conductors are not tri-rated that is something different. Table 4E1A deals with this type...
Replies
1
Views
251
You’d have to change the size but you could just fit an LED panel behind the Perspex or whatever it is you’re using for the opaque top. Sizes of...
Replies
1
Views
234
Hello freddo (and everyone else who commented!), Thanks for your comment. Using that info, I now have this on the main: and this on the...
Replies
4
Views
272
Integral has newly released a tiltable version of this downlight. However unlike its fixed counterpart, it's only IP20; not IP65 rated for...
Replies
2
Views
1K
  • Question
Customer has knocked a bell box off the wall and destroyed it. They would like it removed from the programming so that the alarm can be activated...
Replies
0
Views
254
  • Question
Hi there just after some advice Just done my AM2 and made a blunder on my test and inspection which I know I will fail .. however I have 2391...
Replies
0
Views
216
The goal posts have moved several times so I'd suggest phoning both of the main schemes and asking them. I've always found Napit and NICEIC...
Replies
1
Views
263
Update I’ve been in contact with Solax directly, showed them all the readings I’ve got, and they agree it’s a very high voltage, and that’s...
Replies
1
Views
270

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

5 Popular Electricians Tools Thread

Some Popular Threads

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top