LED Lighting | Page 3

LED Lighting

LED Lighting
That's probably a better option thanks I intented split core anyway, the idea is to leave him something he can move around himself subject to...
Replies
4
Views
405
Terminal box on a UK cooker from 50 years ago would easily accomodate a 10mm2 cable, even though 6mm 2 was adequate. Nowadays, most cookers, ovens...
Replies
4
Views
256
  • Question
That would depend on the instrument. On my old BM10 when you press & hold the button it just powers up the inverter circuits to generate the...
Replies
5
Views
353
  • Question
Agreed, loss of N further down the network can give wildly changeable voltages If it is tied to earth, then that will go up and down too.
Replies
3
Views
445
Who knows? There's this, in the OSG app H: "Permanently connected equipment should be locally protected by a fuse complying with BS 1362 of...
Replies
3
Views
256
  • Question
Can LV cables and earth cables be run in the same ducting or conduit or do the need to be run separately? Same applied to ELV and earth cables?
Replies
0
Views
159
  • Question
If you have a UTR then you must have applied for it so it should be fine unless anyone knows different. Did you register through the CIS scheme...
Replies
1
Views
230
  • Question
Thank you so much for that! When I went to do the Ze at the DB, I tripped the RCD in the CU in the house, I understand that's a hard question...
Replies
2
Views
232
I've been asked to replace an Xpelair CF20 extractor fan which has been recessed into the ceiling. I've had a rummage and managed to find a CF20TX...
Replies
0
Views
142
Just seen this on facebook, near me (stroud , Glos) There always seems to be people looking for experience or an apprenticeship, so hopefully...
Replies
0
Views
225
I think your plan is good, provided there is a suitable socket in the right place.
Replies
1
Views
169
NAPIT Certification Scheme Napit wont accept my C&G 2363 unit credits
The search they do should bring it up. Cropped from the one I was sent to evidence my statement. :
Replies
3
Views
306
Personally, I would just put them in the observations, the inspection schedule is not exhaustive.
Replies
1
Views
192
I've completed this job now!;) That name rings a bell though - think I did fit some and found them a bit on-the-cusp of dropping out the ceiling...
Replies
2
Views
1K
  • Question
I suspect they are PBJ (PolyButyl Jute) which can still be serviceable.
Replies
1
Views
171
Yes all the DC motors at my last job were connected via SWA
Replies
1
Views
175
Anyone have any experience, good, bad or indifferent of Eaton Green Motion Home charge points? I've been asked about these, so I'd like to give...
Replies
0
Views
195
https://ads.google.com/intl/en_uk/start/overview-adon/?subid=gb-en-adon-aw-oth-c-bau!o3~389450322~573810899~206022853~OPTID-6839409&utm_source=fb-d...
Replies
0
Views
112
  • Question
This controller might do the job if you have single colour strip. You'll still need a power supply prior to this! Lots of additional features you...
Replies
3
Views
306
I generally thought double stack boards were more for situations where a portrait design is better suited to the cupboard - you still generally...
Replies
4
Views
424
Dead testing should prove that your earthing is in good condition before proceeding to live testing.
Replies
1
Views
206
In my opinion that is incorrect as the cpc could be broken but parallel paths may not suggest this. From previous threads you clearly have issues...
Replies
3
Views
218
  • Question
In the U.K., depending on cable type and routing, an rcd may not be required
Replies
3
Views
205
  • Question
If you don't match the load to the output impedance requirement of the amplifier you won't get maximum power transfer to the load. You have...
Replies
1
Views
168
You would have to say internal.
Replies
5
Views
316
M
View: https://youtu.be/VH_-sT3zwus?feature=shared
Replies
1
Views
114
Every oil boiler I've worked on has used a photocell for flame detection. Even though your boiler is inefficient by current standards, as long as...
Replies
4
Views
369
thank you so much. that worked out. i ended up shorting the live switch and sparks flew, but i recovered and its all working now. :)
Replies
3
Views
242
  • Question
if you wanna installed second lighting included existing switch, that way is allowable.
Replies
1
Views
200

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

5 Popular Electricians Tools Thread

Some Popular Threads

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top