Search results

Search results

  1. S

    Flexicom 30cx - H/W but no C/H

    I totally understand what your saying. If you were there on site, You'd have most likely figured this out in a very short space of time. I've had a chat with a few other people at work and they reckon it could be down to the interface as well. Some were left scratching their heads in wonder why...
  2. S

    Flexicom 30cx - H/W but no C/H

    I don't think that applies to this particular boiler mate. There's a linked ribbon cable from the main PCB to the boiler fascia PCB. I have checked incidentally that all the ribbon cable ect are sound and no 'links' if any are missing. Hope that eliminates another possible question. There...
  3. S

    Flexicom 30cx - H/W but no C/H

    Hi Sorry if there's any confusion. Please let me explain. On the display, it is the rad symbol that flashes and the 'off' text that stays solid. There is no way during this process to adjust the C/H temp with the + button. It simply reverts back to the H/W demand with the tap symbol and temp...
  4. S

    Flexicom 30cx - H/W but no C/H

    ^^^ Can't get this to change
  5. 20180205_212044.jpg

    20180205_212044.jpg

    • sparky05084
    • Media item
    • Comments: 0
    • Category: Professional Electrician
  6. S

    Flexicom 30cx - H/W but no C/H

    Right then. I've an update. I'm convinced now this is an internal controller issue as the only way to get the heating to work is (as previously suggested) link L - F. Doing L-R did nothing. I'm not very familiar with the cycles but I can only best describe it as a 3 - 4 min loop of the pump...
  7. S

    Flexicom 30cx - H/W but no C/H

    There doesn't seem to be any F codes no. However I do recall a 5. 30. Think this has something to do with the boiler asking for an external demand from a 230v source. I'm setting off in a bit to the property to have one last stab at this. I will link out L-R and check the pressure again I'll...
  8. S

    Flexicom 30cx - H/W but no C/H

    Hi I took it down to 1.2ish yes. I'm going back tonight (clothed up to the max layers and all!!) to try the link out method. So I'm not jumping between forums (sorry phone being a pain in the **** and closing tabs), it's worth stating as per other chaps advice, if I hold MODE for 2 secs...
  9. S

    Flexicom 30cx - H/W but no C/H

    Hi mate. Listen, I do appreciate your point regards technical information and the fact that yes, it may come across your providing it scott free to someone whom is not up to speed with boilers or skilled. I'm not after homework or to have my hand held. I'm just in a panic here and thought no...
  10. S

    Flexicom 30cx - H/W but no C/H

    Hi PEG So, if I were to fit a link from the perm live on the plug to F would that achieve the bypass you speak of? Sorry, yes my level of skill is quite limited however, I 'm more than willing to learn and try to fix this if I of course, can. I'd be massively grateful if you could tell me if...
  11. S

    Flexicom 30cx - H/W but no C/H

    I will double check the pcb fuse but it was fine on continuity. I can't seem to locate an actual troubleshoot that pertains to the boiler display wherin the heating symbol stays as OFF. I noticed the last Gas Safe cert is registered 01/16. There's no 2017 cert. Although I feel I've been a...
  12. S

    Flexicom 30cx - H/W but no C/H

    Oh just to add I drained a bit off the rad and the pressure is now 1.1 bar. Still no change. Thanks 123 for your input.
  13. S

    Flexicom 30cx - H/W but no C/H

    Hi Thanks for sticking with us. Ok, to avoid confusion I will answer each part as per order of your posts (hope that makes sense). 1. When you say stat wired on the old 240v side all I have done is removed the apparent faulty wireless RF and replaced it for a honeywell mechanical stat. The...
  14. S

    Flexicom 30cx - H/W but no C/H

  15. 1517744563879-1704694933.jpg

    1517744563879-1704694933.jpg

    • sparky05084
    • Media item
    • Comments: 0
    • Category: Professional Electrician
  16. S

    Flexicom 30cx - H/W but no C/H

  17. 1517744363718-1083215432.jpg

    1517744363718-1083215432.jpg

    • sparky05084
    • Media item
    • Comments: 0
    • Category: Professional Electrician
  18. S

    Flexicom 30cx - H/W but no C/H

    Hi all Really, really helping someone can lend gods hand with this. Basically, our new house has a Glow Worm boiler and I cannot get the boiler to fire up for C/H. H/W is fine and as soon as you run the tap it produces H/W and the tap symbol with temp displays on the LCD. I've checked all the...
  19. S

    Teaching opportunity *gulp*

    Hey all thank you massively for your responses and your words of encouragement. It's great to see some people responding with actual classroom experience. A real plus in my mind. It's quite clear I have a lot to think about! For those that wish to know, I will receive a hand over and am going...
  20. S

    Teaching opportunity *gulp*

    Hey all Been a while and then some since being on here so hoping everyone is well. Not sure if this is the correct location to post but here goes. Ok, a massive opportunity has come my way to provide some temp cover teaching to various groups of learners in a FE environment. I am wondering if...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top