Search results | Page 5

Search results

  1. Malcolm

    Honeywell Sundial Wireless Controller

    It's a bit rushed. I've left the earths off
  2. Malcolm

    Honeywell Sundial Wireless Controller

    img20160812_21180504.pdf
  3. Malcolm

    Honeywell Sundial Wireless Controller

    If I just draw this out and post it would you be able to just make sure this is correct then?
  4. Malcolm

    Honeywell Sundial Wireless Controller

    Right so S/L goes to same as pump live and HW on then, Someone told me it went to the white and CH on?
  5. Malcolm

    Honeywell Sundial Wireless Controller

    That was my first thought, but it's new, and I've never had one go wrong. so I've been questioning my wiring. I've drawn it out, the only thing I have been wondering about is the switch live from the boiler, because it doesn't show on the honeywell diagram.
  6. Malcolm

    Honeywell Sundial Wireless Controller

    I did it on Monday and have been trying to contact Honeywell since so having trouble remembering. From what I remember with the programer off there was no voltage on the white and I don't think there was on the orange either? But when switched on the white and orange came on. But like I said...
  7. Malcolm

    Honeywell Sundial Wireless Controller

    Sorry Y plan . The boiler is a Baxi Solo 3
  8. Malcolm

    Honeywell Sundial Wireless Controller

    Hi I hope someone can help with this. I cannot contact Honeywell to help by phone (lines constantly busy) I emailed them on Monday and still heard nothing. I replaced a Honeywell smartfit wired controller and programmer with a Sundial Y9420S RF pack3 wireless system. I have found that the...
  9. Malcolm

    Low R2

    Hi all. Didn't have time to do any electrical work on Saturday. Was helping him move all his stuff from the old house. Dave & Matt. Yes I wondered if it could be the building that was bringing it down, but I had never come across it before.
  10. Malcolm

    Low R2

    It looks like I might be up there on Saturday so will try things out then. I will post back Thanks
  11. Malcolm

    Low R2

    Sorry wrote it out then got sidetracked. Pete, yeah will try that also.
  12. Malcolm

    Low R2

    Pete, yeah will try that also.
  13. Malcolm

    Low R2

    Right just checked the rest of the roll. L 0.37 N 0.37 E 0.67 Which is what you'd expect. So why it is down on the install I'm stummped.
  14. Malcolm

    Low R2

    Thanks for the replies. (Hightower) No parallel paths. End to end on drum, I will try that. It was a new 100Mt roll. (Steve) It's a double garage, the CU is in the garage. so total ring about 15/20mts? They are fixed to a breeze block wall. (malcolm) Will do, I will be going back there next...
  15. Malcolm

    Low R2

    Nope. Checked it half a dozen times. same result. Checked it with my other mft, same result.
  16. Malcolm

    Low R2

    Hi. I don't know if anyone can help or shed any light on this one. I installed a new circuit in my sons garage. 2.5 T&E clipped direct, 4x metal clad sockets and back boxes. I haven't terminated it into the CU yet as I need to get a RCBO. I just got everything in place and did dead tests...
  17. Malcolm

    Should I report or not?

    I found a number for I**a, recorded message said I would be waiting around 4mins. I hung up on 24mins. Seems like they don't like to talk to customers!! I replaced the old light with a pendant. Got the old light in the back of the van till I decide what to do with it. Thanks for the replies.
  18. Malcolm

    Should I report or not?

    Re: Should I reportb or not? I went on their website when I got in to find a contact number. Nothing at all, no number, no email. it's as bad as their products.
  19. Malcolm

    Should I report or not?

    Hi I was doing an EICR the other day and one of the things I came across was incorrect polarity on a metal ceiling lamp (ES). I checked the lamp connection at the rose and that was ok. So assumed that the problem was earlier, above the ceiling. I went in today to do some remedials and took the...
  20. Malcolm

    Wylex NB20

    I used found a board that was using a mixture of these and NB's, Dorman smith, they seemed to fit well. DORMAN SMITH 20 AMP TYPE 2 M9 MCB CIRCUIT BREAKER 240/415V S202 BS 3871 | eBay

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top