If you don't have any training and certification to bs5839-1 I wouldnt be very keen on giving any sort of certificate for that work. It means you are responsible for that whole system and if anything was to happen during an emergency then the buck stops with you. I was advised against doing any...
Total control is a form of storage heating. Works from a teleswitch with 3 outputs. One for the storage heaters, one for panel heaters, immersion boost and electric shower and one for off peak immersion. The customer may be requiring you to connect the 3 tails from the heating board into the...
Got talked into taking out a similar thing with tescos, £1200 for 2 years. Must be around 3 years ago and the cards are still on display, got my first call last week! I'm not even trading under the same name but still have the same phone number. Avoid like the plague!
First thing I would check would be the time clock which should bring the heaters on around 11pm, could be its faulty. Unlikely to be fuses if all 3 heaters are not working.
I believe this is permitted, don't know the regs or any particular conditions which have to be met but when I worked for my old company there was certain occasions when this was done on large steel frame structures.
Clipsal used to do black accessories and I'm sure they did red, green and blue too, this was around 10 years ago though. Don't know if they are still available.
The Henley block on the right is permanently live as it is fed direct from the meter so the tail which then goes into the left of the time clock is the live in and the one on the right is the switched live which will become live at the set off peak times. This feeds the Henley on the left which...
They operate in the same way. If you are just fitting a new one you would be able to leave the back box and just change the front plate, 5 minute job. Easier than trying to fit 2 separate timers.
Had a ring circuit with a spur feeding a 2 gang socket coming directly from the 32a mcb. Ring main has since been stripped out and just left with the spur. I have now fitted a 2 gang socket in 4mm directly below the cu, is it still acceptable to leave the 2.5 spur coming off the same 32a mcb?
Got a call this evening asking if I could repair overhead lines between house and garage, haven't seen it but think it could be about 20 meters. Shouldn't be a problem but where will I get cable, is it something that the wholesalers normally stock?
Only used the click deco range. It's cracking stuff, lovely finish on the chrome plates and the switches and dimmers can be mixed and matched on the same plates.
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc