He must have noticed only one cable in the back box . More likely a loose live in socket 10 or 11. Get you spark back and get him to test correctly . If there is only one cable in one of the sockets then he should have brought it up and not powered up the circuits
Cheers dark wood for you reply I think yours is the way to go in the near future . At the moment I will fit the MCB to stop any problems thatcould happen in the meantime and gives me more time (have too much on at the moment ,doingdl sixty hours and more stuff being push on at the last minute )...
Cheers dark wood for you reply I think yours is the way to go in the near future . At the moment I will fit the MCB to stop any problems thatcould happen in the meantime and gives me more time (have too much on at the moment ,doingdl sixty hours and more stuff being push on at the last minute )...
I could have moved it but it would have been a knock on effect and took too long and would of been left with a hole in the case ( then patching up or buy a isolator to cover it up) . Pain . Half the circuits off this board can go , so it will only pull about 5 -20 amps at any time . But as had...
Took the incoming kit apart and the main switch looks like it can be replaced by a MCB . Ordered a 100a c type and the tail after removing tape on lugs are 50mm . £170 for a MCB. Let's hope it fits
Yes the board has a 125 incoming kit I was thinking of use a 80a MCB if it will fit or if not move stuff around so I can use the isolator next to it loop a few feet of 35mm over into the top of it to feed it ,remove the current tail from the board and change the fuses to match .
Yes the 250ampnduses are protecting the whole busbar other isolators are connected going off the. Feed other stuff (not important) but the board in question is bolted on to the busbar with no peotprotec . I could of course remove the board and fit a isolator and relocate the board (but am...
My boss has just took over a new site and I went to look the layout. Some boards are damaged some cables need replacing and am sure some other stuff. The site has a old busbar with isolators feed various boards and of her isolators. It also has a board connected directly on to the busbar . The...
Well it is related to something else that happen lately all my large swa off cuts have been robbed and a 35 meter lengtt of 50mm 4core which I cut out off the ceiling cos it had been damaged has went as well . That was my graft and some pr#£k has robbed it before I could
I did a job feeding two portacabins about six months ago and used two 3 core cable two feed them and it got me thinking when I seen this today as the two feeds had to be run though ducting and both had to be put in weather proof box es to be connected to flex to be plugged in to the portacabins...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc