Search results | Page 7

Search results

  1. M

    Accessible or inaccessible?

    If it's under the floor MF only . Hatch's marked floors no difference just MF it ,only tight gets think about screw joint boxes
  2. M

    Max amps from UK socket

    This is a guess . Do the motors pull 5amps , if not good but if switched on at the same time the peaks may do . You could fit overloads to protect each motor and a stop start circuit for each motor to be able to delay the start of each motor from each other (you could design a timer to start...
  3. M

    Max amps from UK socket

    The Clarke are ok welders .top setting will blow your 13a fuses after a few minutes , but to weld 3mm not a problem . Spend a few quid and get it converted to a eurotouch, as the torch it comes with is not the best
  4. M

    3rd Amendment CU's Cable Entry

    Depends on where or how the old board is placed . Nothing wrong with mounting on a back board and feed cables though the back
  5. M

    New toolbag suggestions?

    Ck magma is the one I use now about £45 if I remember right. Did ask in cef about their Klein bags ,look cool but noway
  6. M

    Cooker outlet, no room + gas ignition

    Your right it is just guidance as is almost every word in the book , but yeah i get you point . I just MISSREAD and thought that the op had changed his mind and was going to plug into the ring main instead(his choice only guidance) .
  7. M

    Cooker outlet, no room + gas ignition

    if it's over 2kw needs its own circuit
  8. M

    Are Digital Laser Measures as good as the internet makes them out to me?

    Will never buy Bosch again as the stud finder was a waste of a £100 as well
  9. M

    Are Digital Laser Measures as good as the internet makes them out to me?

    Laser are poor in direct sunlight tryed the Bosch outside a few weeks ago and was less than useless
  10. M

    Cooker outlet, no room + gas ignition

    Go for the duel click cooker outlet and if you want drop one cable in a sw fuse to put the ignition into
  11. M

    Holesaw kit recommendation

    The Bosch kits are great but expensive, save all the messing around trying to remove the cutter
  12. M

    which automatic wire stripper is the best?

    I know what your saying Pete , but for testing at first fix it speeds it up five fold .But yes of course you should be able to strip manual
  13. M

    which automatic wire stripper is the best?

    I use ck ones ,would highly recommend. In no way are they a waste of money and I have many tools which are
  14. M

    Bonding... can I keep it at 6mm?

    Or you could disconnect and measure it and see it's resistance
  15. M

    Lights problem with LED lamps not turning off

    What's a snubber
  16. M

    Problem with adding a spur to a socket

    It's not likely but check if you cross threaded the screw
  17. M

    Problem with adding a spur to a socket

    Try doubling up the conductor s going to be spare, giving a bit more to grip to . If it's that you forcing the socket on and their not enough space you may have to sink a deeper back box .
  18. M

    Should employees be expected to pay for there own training courses?

    I have the term engineer . It's used to such a wide range that it is meaningless. My boss describes me as it all the time ,when really am head of the maintenance department (the maintenance department is one person ME). Employers would check competent not just ask because 90% of people will say...
  19. M

    Should I qualify?????

    It's like anything use it or lose it . I done a HND in electronics and telecoms when I left school and can't remember nothing as when I left the industry was on its --- and took years to bounce back
  20. M

    Shared neutrals in lighting circuits

    It late but am missing this , have to draw it out . With all lights in and switches on knock power off switch mcbs off check on low ohm setting between the two lines any reading will tell if they are connections between the two circuits and it all the lamps are working then the bridge between...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top