Are Digital Laser Measures as good as the internet makes them out to me?

[Jamchiv01]

Hello all, recently I was installing some new downlights in a large kitchen, and trying to measure the room width/length alone was a nightmare with a tape measure so I did some research on laser distance measures and they seem to be a good way to go.

Has anyone ever owned one and are they as good as the internet seems to make out?


This is the one I'm thinking of getting due to the Bluetooth connection and better display for daylight:
Bosch PLR 50 C Digital Laser Measure (Measuring up to 50 m): Amazon.co.uk: DIY & Tools - https://www.amazon.co.uk/dp/B00UN62Y1O?ref=emc_b_5_t

 

[SparkyChick]

I own the Bosch GLM50C and it's a god send. I've tried the app for the Blutetooth link up on my iPad and whilst it's good, it's a bit fiddly and time consuming so I normally just measure and sketch.

Handy for volume calcs too.

But, for on the job use, I generally just revert to the old faithful tape measure

 

[Rpa07]

Jamchiv you keep turning up like a 'good' penny. Are you too busy for us all?
I've yet to invest as I have got away with the tape measure in 3 different lengths giving different strength of tapes.
The Bosch range are on my radar. Good prices if you don't lose it.

 

[Jamchiv01]

I own the Bosch GLM50C and it's a god send. I've tried the app for the Blutetooth link up on my iPad and whilst it's good, it's a bit fiddly and time consuming so I normally just measure and sketch.

Handy for volume calcs too.

But, for on the job use, I generally just revert to the old faithful tape measure

Thanks for the review and do they work well in the daytime?

Jamchiv you keep turning up like a 'good' penny. Are you too busy for us all?
I've yet to invest as I have got away with the tape measure in 3 different lengths giving different strength of tapes.
The Bosch range are on my radar. Good prices if you don't lose it.

I hop on here a few times a week to see what's going on when I'm not busy

 

[SparkyChick]

Do they work well in the day... I don't do much quoting at night

Yes, it's clearly visible... can't say for bright sunshine, it's been lacking recently, but I've not had any problems spotting where I'm measuring.

 

[telectrix]

i rely on my laser digital size 9 feet. 5 1/2 strides = 1 pole. 4 poles = 1 chain.

 

[D00DY_T00DY]

i rely on my laser digital size 9 feet. 5 1/2 strides = 1 pole. 4 poles = 1 chain.

Right nipple to left arm finger tips = 1 meter lol

 

[Jamchiv01]

i rely on my laser digital size 9 feet. 5 1/2 strides = 1 pole. 4 poles = 1 chain.

So when you need to measure a ceiling you do a handstand on a piece of wood suspended, now that's just pure talent

 

[stevethesparks]

My favourite in laser distance measure is Leica
spec says within 1mm - whatever the distance! Excellent piece of kit when marking out down-lighters.

 

[D00DY_T00DY]

So when you need to measure a ceiling you do a handstand on a piece of wood suspended, now that's just pure talent

Always wondered how the foot prints ended up on boarded ceilings. Clear sign that tels about.

 

[telectrix]

Right nipple to left arm finger tips = 1 meter lol

nope. left nipple to left fingertips = 2 cubits.

 

[D00DY_T00DY]

nope. left nipple to left fingertips = 2 cubits.

Think you need calibrating.
I'm getting 2.23 on my end.

 

[D00DY_T00DY]

nope. left nipple to left fingertips = 2 cubits.

My god. They're actually units of measurement.
How do you go about measuring a horse? How many hands in a cubit?

 

[mickfred]

Laser are poor in direct sunlight tryed the Bosch outside a few weeks ago and was less than useless

 

[mickfred]

Will never buy Bosch again as the stud finder was a waste of a £100 as well