I've carried out Continuity tests on all four conductors this evening to find it is 2 RFCs, both sets of circuit conductors have now been marked so they can be identified correctly. Also on closer inspection I've found an sorry looking 32amp breaker in amongst a load of other rubble which could...
Tell me about it did think it would get so many mixed opinions! Always tell myself it doesn't hurt to have a second opinion on things and as I wasnt certain about this that's what I done. Thank you for the positive outlook and advice ?
I'm not saying it's correct just saying what I've seen. That's why I've asked the question to make sure its correct.
1588089613
Thanks for the advice it is much appreciated?
After some advice I need to install a 230v ac flashing beacon to indicate a circulation has stopped any advice / ideas on the best way to do this?
Preferably taken the power from the bottom of the contactor that supplies the pump.
Yes main RCD from house CU is 80amp 30mA.
1580760156
Would you say this is Necessary? Surely supply MCB from the house is doing the same thing when isolated?
I never Intended to remove it (Main CU RCD). Just wanted to know could I do away with the RCD at the garage consumer unit if the supply circuit from the house is already RCD protected?
The existing supply to the IP66 junction box is a 40amp MCB supply, which has seperate RCD protection along with all other circuits on the main CU. Reason for leaving it as a 40amp supply and not changing it to 32amp is the RCD in the garage is 40amp? Surely having a garage 40amp RCD (Main) off...
I have a 40amp typeB MCB (RCD protected) supply to an IP66 junction box in my garden which the runs in 4mm swa cable under my garden to the garage into a 13amp socket.
I want to fit a new consumer unit I'm my garage to run a lighting / ring main socket circuit. Question is can I just use the...
Surely it would additional protection for the garage? Also I may use it to plug in a hot tub in time and that would need RCD protection.
1580578664
Would it matter if I did add another?
Literally nothing the odd power tool, maybe a jet wash at the most and a lighting circuit
Not a great deal really, a garage roller door, occasionally a few poor tools and a lighting circuit (LEDs). Would you recommend putting in a smaller CU in the garage in this case then?
1580577102
In this...
Hi,
I just recently bought a house and the garage has a supply coming from the house CU via a 40amp MCB which runs into a IP66 rated 13 amp double socket in the garage, I'm almost certain the cable size is 4mm (SWA cable).
Ive just recently finished an electrical engineering apprentership...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc