Hey Chaps and Chapets,
I Had an insurance job today as the lightinghad gone in the house. After more questioning it turned out that they we're trying to fit a new light and couldnt figure out how to wire it back up (i do like these jobs, pays the mortgage).
Anyway, so i know how to wire up a...
Hey,
I've just past my trade test and was placed on a new build to complete the 2nd fix
as the guy who roughed it has left.
Anyway, he's wired the lights using the loop method at the switches, I've never did this
previously as I would always do the joint at the ceiling rose, this has thrown me...
Evening gents bit of advice, testing the above and when switches are on a reading of 3.13 ohms is apparent. Now when a switch is turned off I would expect a dead circuit I.e infinite >2000 but no a reading of 60.4 ohms is shown any thoughts on what this could be ?? Cheers
Hi there,
I have 2 two way lights that i want to make into a 3 way arrangement.
1 of the 2 way switches is for the downstairs hall light and connects to a 2 way 2 gang switch at the other end of the hallway.
The other 2 way switch is upstairs and lights up the stair case and upstairs hallway...
Hi I have looked and tested a 2 way lighting in a domestic front room. When one switch is on the other can show 230 volts on all strappers and then in reverse when switched??
One switch is correct or the other depending on how it is switched any idea please Thanks Ian. :19: Should be simple!!!
ian65
Thread
2way
don't
electrical work
strappers
switch
switches
as above, has anyone have any experience of this using touch dim switching ?
how does it work 2 wayed using retractable switches.
i was under the impression i could have a touch dim dimmer one end and a normal 2 way switch the other end, however, the lights are doing funny things, ie dimming...
I'm an apprentice and have been asked to install 2 sensors with 2 lights! Was just wondering how to 2 way these sensors as there is just a live in neutral in and live out neutral out? Sensors must bring on both lights. Thanks
Is there is any reason why 2 way switching wouldn't work for a PIR floodlight taking into account the PIR setting and the manual override mode??Obviously it would be wired correctly!
Just yes or no. No abuse please!
on a new build housing development.
2 way across hall
fed at switch with 3 core going to other switch and then switch line from that switch to light. so i have 2 feeds and 3core at 1 switch and then 3core and switch line at the other. never seen it done like this not sure if it will work ...
Hi Every one. new user, first posting.
I mainly like to read the posts but i can't find an answer to something i need to know. I have just bought a house which about 25 years ago had an extension on the front. The old Wylex fuse board is in the centre of the house. This was kept there with...
Hi all,
Putting in a a hallway lighting circuit on a new dwelling controlled from 4 points, client wants a dimmer but is happy to incorporate just a 2 way dimmer to save getting involved in master and slave units.
Just want to check before the 1st fix that the dimmer could be either the 1st or...
Hi All.
I am not an electrician but I do know a little about electrics,I know a little knowledge is dangerous,lol.
I want to fit a pir to operate the landing light and hall light and a pir to operate the landing light.
Downstairs I have a one gang double switch which operates the hall and...
Evening everyone
I have been asked to price to add some more sockets and lights to a garage plus a few out side sockets.
now the garage already had a supply from the house via SWA cabling which just feeds a socket and the lights via a fused switched spur.
now the consumer unit in the house is...
Just went next door round to my neighbour to help him him out with electrical issue. He changed a fuse to a 2 way lighting circuit and now the light only works in one position. I can only assume he has put the wrong fuse in?
Column79
Thread
2way
circuit
electrical work
fuse
light
lighting
lighting circuit
new
position
works
Hi all,
I was hoping for some advise on wiring the above switches, I have knowledge of vehicle electrics etc but didnt want to attempt this before speaking with you guys for guidance.
My house is a new build (2 years old)
I have a ceiling light in my living room with 2 seperate switches...
bridger80
Thread
2way
build
dimmer
house
light
light switch
master
new
new build
slave
switch
wiring
Evening all,
I fitted 2 columbus press switches today to control 3 lights. I wired as it explained in the diagram and they worked fine. But I found that if you push the either of the switches to turn the lights on and press the other one whilst the lights are still on then it shuts the lights...
Hi - very new to this forum but having had a look at some of the previous posts - this is probably the best site for me to get some help.
I have a lighting circuit i my garage (1 light activated from 2 switches) and i need to add an additional light to this circuit. I think it is as simple as...
D_Hurst
Thread
2way
adding
circuit
existing
fitting
help please
light
minor
please
simple
works
Have just rewired a house, but am getting a fault on the 2 way lighting. The switching tested OK and operates from both switches but I get 12V on the switch wire when one switch is in the off position & 24V if it off via the other switch (240V in the on position from both switches). The IR...
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc