Evening all,
With so many smart/connected home products on the market now, what are the great and the goods thoughts on dropping 3 core down to switches when using the 3 plate system for lights to provide a neutral at the switch?
I know there is the loop at the switch method which I have used...
Sorry if this is not the correct wat to post my query, I am new to the site. I am not a spark but would like to tap into the skills and experise on here before I set off on the wrong course with my current spark. I am having a garden office built, it has had its own CU installed but my ex spark...
Hi can any one help please doin some work on a house and one of the problems on the test report is there's a 3 core feeding 2 breakers ( red feeding downstairs lights and yellow feeding upstairs lights) and only the one nuetral. Now if I could rewire it I would cables concreted into the floor...
Hi Folks
As per my previous thread. I plan on making and selling some lamps. I want to have two versions; one with a metal bulb holder and another, cheaper version with a plastic bulb holder.
The issue is that I am using 3 core fabric cable and the plastic bulb holder does not have an earth...
Got a drum of swa up for sale. Surplus to requirements. Still on drum and wrapped up. I work all over country so possibility of delivery. Just ask. Based on Stockport at weekends £130 and a bargain at that
I have a 3 core t+e on a 2 way switch and when it is turned off there is still 45 volts at the light. I have stripped this down to a 1 way switch and the voltage disappears. I then meggered the 3 core and it is clear. There is continuity through the conductors and no obvious fault with the...
ive got umpteen metres of 10mm 3 core swa I need shut of, longest length is approx 30m,
£2.50pm ono collection only from Leeds or arrange your own courier, all new never been used.
taking up far too much room in my garage so will be going to the scrap yard If not
Hi, working on a new penthouse installation, needs a new supply cable from the basement, engineer has specified 35mm tails. Gonna need to pull in about 40 metres of 35mm 3 core swa, never handled this stuff before but im expecting it to be fairly heavy and not easy to bend, the run is pretty...
even disconnect every circuit from main distribution board and still getting readings checked on another site getting it there to awaiting cable company answer tn-c-s any domestic houses answers please .
Hi everyone
can any one tell me a good tool for cutting the outer sheath on 3 core flex between .75 and 1.5mm. also 5 core flex 1mm as well
I always seem to catch the inner cables.
have seen this but does it work?
Jokari cable stripper - Coaxial : Carl Kammerling International
cheers
I am in search of a regulations compliant electrical wire that is used in power cables and kettle leads with the appropriate colour coding i.e. green-yellow, brown and red.
The only caveat is that I need a flat version of this wire and not the round one.
Can anyone tell me where I can source...
Doing a re-wire for a customer who's had their kitchen redone recently and told me the electrics are fine.when I checked, they've all been wired using 1.0mm 3 core flex then sealed underneath tiles.I can't remove the tiles or pull through new cables.Is it permissable to leave it connected like...
Hi Guys
I need to add a 3A FCU to 3 core and earth cable for a timed extraction fan (prior to the TP switch), how is this achieved with only L N and E connections on the FCU?
Regards
DIYBlues
I need to install a sub-main supply cable from the house to a shed approx 100M away. The SWA needs to be 25mm csa for volt drop requirements - I intend to install a 100mA RCD and 40A MCB to protect the cable for overload / fault protection using the armouring as a means of earth. Then with the...
My local electrical shop was out of stock of 1.5mm 3 core flex but offered to sell me the normally more expensive low smoke or heat resistant alternative for the same price. I have bought some but it is a lot a thinner than any 1.5mm I have ever used in the past or see in other shops now, its...
Hi I currently have a few drums of cable left over from a job and am now offering them on here for a very cheap price as I need the space .
They are all brand new 100m undamaged drums I have :
4 drums of 2.5mm twin and earth
4 drums of 1.0mm 3 core and earth
6 drums of 1.0mm twin and earth...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc