My extractor fan has given up the ghost this week and I was hoping to replace it myself, however I cannot do a like for like swap as the current fan is rated for zone 2, operated by a switch on the fan housing but located within zone 1,
My plan is to replace the old fan with a zone 1 rated...
Hi - I am adding a NEMA 6-50r outlet in the garage for my welder. I pulled 6/3 Romex back to the panel where I will install a 50 amp breaker. The NEMA 6-50r outlet does not need the white neutral that's present in the 6/3, but I wanted it in the box in case I ever purchase an EV and switch...
Hey guys!
New DIY 'new build' homeowner trying to not cause any damage to wiring!
I'm looking to swap out the existing traditional light switch with a 3 gang smart switch in my kitchen. I've successfully managed to wire in two 2 gang smart switches in the bathrooms but this 3 gang switch has...
Hello again.
My car battery is draining completely overnight. I charged it up and ran it through a fairly decent battery tester which resulted in a GOOD BATTERY advice at the end. It tested charging, cranking response, load at 2500rpm etc. A known old battery was a fail, so I'm reasonably sure...
Hello all,
I’m looking for some advice regarding a recently broken MVHR unit in my flat, model Heatrae Sadia Advance.
The unit is out of warranty and Baxi, who provide product support, have suggested I employ a Heating & Ventilation engineer to diagnose the problem.
Before I do, I would like...
Hi there,
I've fitted a Sonoff BASICR2 smart switch for controlling my outside lights. I was just wondering if it needs to be contained in an enclosure or if it can be left as is?
https://sonoff.tech/product/diy-smart-switches/basicr2/
Hi there,
We're currently having a new kitchen fitted and in the process we've had some new electrical work done. The electricains are comeing back on friday to install a new fuse as they didn't have a 16A one with them for the outside sockets (the cable is apparently not suitable for the size...
Advice on a London fast course to get C+G 2365 Level 2 - I am on a site in London as an electrical improver but I do need to finish my level 2 because I am an idiot and dropped out of college for a job 4 weeks before completing the year. I am now trying to quickly get back on track to be back at...
Hi guys, some advice on the damaged cable on the picture posted would be greatly appreciated.
I want to know the factors on how a wire can get exposed like this? How can one make it safe and other information like how old the wire looks?
Thank you
I am about to install two electrical receptacle outlets above a kitchen countertop. 50+ years ago, the original house wiring had no outlets there.
1) Do both outlets need to be GFCI, and each with their own individual 15 amp/or 20 amp circuit breakers? Or can both GFCI's be connected together...
Hi
Just curious to see what people do if the work starts to go quiet.
Not really happened to us before!!!!!
We are general contractors, bit of everything (Schools, Restaurants, HVAC that sort of thing)
- Do you ring round existing customers just as a ‘Hello we are still here’ sort of thing...
Hello,
I'm currently in Scotland and I am looking to retrain to be an Electrician.
I was looking at going down to England and sitting my C&G 3 diploma (2365), Inspection and testing (2391-52), and 18th edition ( 2382-18).
Once I have these what work I am actually allowed to carry out and...
So I recently completed a 4 year apprenticeship, EAL Level 3 Diploma in Advanced Manufacturing Engineering and HNC in Electronic and Electrical and now a qualified technician and got the job. I work with a lot of electromechanical equipment (conveyors mostly) but despite learning about...
Hi all, looking for abit of help/ advice, no one to really ask in person so thought i would post it up here.
im an industrial maintenance electrician soon to be redundant unfortunately, rather than jumping at the first factory I see, would rather take my time seeing whats out there and in the...
Hi,
I need to run a spur from a main ring socket, however, it already is supplying a spur ( double unused socket ). Is the only way to disconnect the unused spur? Or can I incorporate a fuse? What's the safe way to do this please?
Thanks
I am replacing a 2 way switch with a smart switch. The old switch has three sockets - common, L1 and L2. I can see where the wire that went into 'common' goes on the new switch, hit the new one also has 'P' and 'L' instead of L1 and L2 - which wire goes where?
This is off the mainline above the weather head. On the end the wire got pulled out after a tree fall. Was this a fix from a previous wire rip?
Can someone suggest how I could go about fixing this or should I just pay the electric company to fix it? Im thinking just buy a new adaptor and...
Hi guys,
Not sure if this is the right place to ask since it's more of a general question. I'm looking for a bit of advice. I completed my level 2 and 3 a few years ago and I'm now looking to get into electrics full time. The problem I have is I have no on-site experience. I technically have...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc