Asia Appliance Expo (AAE2012)
Date: Aug. 21-23, 2012
Venue: China Import & Export Fair, Pazhou Complex, Guangzhou.
Only more than one month left to the AAE 2012 held! AAE 2012 Organizing Committee does the best to build an unrivalled business platform for you to communicate with potential...
Hi there everyone!
I'm not an electrician so please ignore my ignorance, I'll try to make this post so that I look like as little of an idiot as possible.
I'm planning on buying a coil burner from the US as they're near impossible to find here in the UK. As it's built an manufactured for the...
Hi guys, doing a kitchen refurb and all appliances are built into units. One wall in particular has no work tops and has built in cooker, microwave, fridgeand freezer. Can I just put sockets behind the appliances (on the ring) or do I need to be able to isolate
Cheers
I acquired anElectrician/husband model number 001 in April 2006 and recently it’s becomefaulty.
It seems tohave interfaced with a forum message board and is no longer responding tosimple instructions. It seems to come home from work and conk out at around5.30 when it plugs into the message...
Hi all,
I am looking to fit a grid switch to the ring main in a kitchen. It will not be pulling much load (extractor, gas hob igniter, dishwasher, and the drivers for led lighting). I plan to wire it just by linking between the supply terminals from the ring. I appreciate it is putting a few...
I have been installing several appliances lately in rental properties and the agents/landlords have been asking for installation certificates.
Im not happy to issue a Minor Works cert or a EIC because they all require R1+R2, RCD Times, Zs, Ze, etc.
Has anyone got a plain certificate saying said...
Hi Guys,
Just reading through my spam and got an email for a voltage optimiser - claiming to save you money by reducing the voltage!!!
MyPlanet Voltis Voltage Optimiser
To me this is bull, if something need 1kW to work then it will consume 1kW..no?
My Math example:
At 240 volts:
1000watt...
Designing a kitchen appliance circuit, i plan to feed a bank of grid switches with a 6mm T&E fed via a 32A MCB, then each switch will have a 2.5mm cable to a fcu supplying an under counter appliance.
My main question is, is it ok to change down to 2.5mm and then feeding the FCU? As the cable...
i have read that the above plate is suitable for adding a hardwired cable of 4mm for the 6kw hob and 2nd cable to a separate socket for the plug in oven which is 2450w, 13amp. do i use 4mm cable from above easyfit plate to the 13amp socket.? help is appreciated. tony 2
hi all, wondered if anybody can point me in the right direction on this, i have just decided to leave job and go it alone, i have an assement
booked and need to provide a job for the date in question, if i install a grid switch for kitchen applainces, does it need to be in
the kitchen, or can...
A customer telephones and complains that one of the socket outlets that you installed earlier appears not to function. State the procedures you would follow in order to identify the possible cause of this failure prior to visiting the site.
open to all suggestions thanks in advance..
Hi guy's, Had a call yesterday from a kitchen fitter whos having a bit of bother with a customer, he didnt go back to re-grout some tiles so the customer called in some company called home care, who made a list of things wrong with their property i.e. dis-board not up to current regs., cupboard...
Hi guys, I hope you can help me. I am an engineer but not on electricity, so I apologise if I am using incorrect terminology. Today for the first time, while my dishwasher was on, I heard a clicking noise and it stopped. The noise came from the relevant MCB on the consumer unit (which also feeds...
Can anyone throw some light on this issue , i have a family member who has been told by the council she will have to move her cooker and hob ( when they do the re-fit of a new kitchen )
To the outside wall of her property , (not inner walls ) .
I can only imagine reason would be fire , i have...
Hi guys started a thread recently about my house rewire which im starting soon but i still have some issues,
as ive said in the past i very rarely do domestic work so thats the reason im asking but here goes...
im just after a bit of info and reassurance on kitchen circuits im getting an...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc