I'm installing an EHU on my drive to plug in my motorhome. The instructions say to earth the armoured cable to the earth point in the termination box but on the commando socket there is no point. The socket is mounted on a piece of angle iron set in the ground so can I earth to that or should I...
I got called to look at a job for a landscape company, one of the chaps who works there is a mate who recommended me. It would be a good contact to get some regular work especially as they dont have a regular spark.
The customer wanted to have an external socket to run a water feature. The...
Hi I am installing a 22 amp water heater under the sink and cant get an internal cable back to the consumer unit so the only route is outside either under ground or clipped around the house my question is , is this within regs and what rating cable should be used, the distance is a Max 15meters...
A farmer wants me to run a new supply to a building, it's to be run in 35mm armoured, part of the route is a 25m overhead span between buildings, is this okay for the cable or should I be getting an extra pole in the middle put in to take the weight
Hi,
I've just come across this forum so I hope someone can help me quickly on this. We recently moved into our new build home in April 2015 and have been here for 2 months roughly.
I was mowing the rear lawn this evening and kept getting the mower stuck on something in the lawn. Not thinking...
Hi, i am using armoured cabling from fuse box in house to a workshop at end of garden. 40 meters away. a garage consumer fuse box unit will be used. This will supply wall plug sockets and lighting. Out door plug sockets will also be put outside the building to run a pond that is about 30 meters...
Yeah I know it's an odd title. Currently looking at a job where an SWA runs down a garden to a shed, but it is just laying on the ground and looks rubbish. I am guessing the last installer left it like that due to the difficulty in burying it, so at least you can see it........ The only run is...
I have a cable running from a mains socket in my house, down the garden thru a white thick plastic tube.
The cable on leaving the house runs down the wall and along a patio with no tube around it. It's a standard, tho thickish, cable.
It runs into the shed, to a double socket that supplies a...
Hi guys,
I have job on to install a consumer unit, the problem is I'm unsure weather to supply the consumer unit with meter tails or an armoured.
the setup is the meters are outside on the garage wall and the consumer unit is on the other side of the garage fed in 10mm tails currently. The...
Hi all what would be the best option. A client has an existing armoured cable that is spurred of the living room socket via a 13a FCU, the armoured cable is then run to a shed, were they used to have a lights. Now as the shed was rotten then have taken it down to replace it. This time they would...
Hi guys ,
I would really appreciate some advice from you pros, not sure if this is posted in the right area ,sorry if it's not.
basically I'm building a fairly big garden room /man cave at the bottom of my garden and I need to get power to it ,here's the deal , consumer unit is at the front of...
Afternoon All.
I am currently doing an electrical job for a customer, who has a build an external shed, at the back of their garden.
i have currently installed 15 double sockets, 2 lighting points on 2 separate circuits.
The distance from the consumer box to his shed is approx 30 metres...
50 Meters of 4 core 6mm SWA Armored Underground cable with Industrial Grade SWA Gland Kit
Left over from a Job
Make me an offer?
I'm in northern ireland
would prefer collection but can post
Hi All,I've just worked in a large, very old, house where the intake is in the garage, from the meter, tails go to a henley block then go through a 60A 30mA obsolete ELCB to a DP isolation switch that then feeds a twin & earth cable (looks like 16mm) which then runs 21m through the house to the...
Hello Gents,
I need a little advice , I need to connect to oil filled heaters via fused spurs( flex outlets I have use SWA cables - to keep the radial intact is it best to connect the 2 swa into an adaptable box and connect in singles to FSU and back out second armoured feeding...
Evening Gents,
Im looking for some advice, I have to connect two convector heaters on a radial circuit - I will be connecting each outlet via fused spur flex outlet, I was going to use a 3x3 adaptable box to terminate the one armoured then connect in singles to fused spur...
"Hello All",
I am trying to find out some information to give to a Friend who is investigating the cause of Damp in his Home`s wall and has seen that his neighbours have Armoured cables entering their building through just a Hole / `Slot` in the Brickwork under ground level [Not visible at...
Good evening Gentleman.
I have had a small job in the pipeline for a while for a customer who is having stainless steel bollard lighting down either side of their drive way.
Nipped up to check on the jobs progress to find the client couldn't find the correct size light fitting so he has...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc