auto | Page 5

auto

Recent contents View information Top users
  1. Pip

    Generator auto run switched from two sources?

    Hi Guys, Hope I'm in the right forum area. So Have a 3 phase gennie set up which I've been involved in. Customer has supplied the 125amp 3 phase gennie to run power at a workshop, and out buildings in the middle of a wood. All went very well, and as a bonus a key switch was installed on the...
  2. C

    Seaward 350 Auto Mode Tests Help!

    I have got a Seaward PrimeTest 350 and am just trying to get my head around the auto mode tests, and to also make sure the settings for these are correct. A- Portable/Handheld/IT CLI Visual Test > Earth Continuity (0.15) > Insulation (250v - 1.00) B- Portable/Handheld/IT CLII Visual Test >...
  3. A

    Auto electrics - where am I going wrong?

    Guys, Wondering if any of you with auto electrical knowledge could tell me where I’m going wrong? I’m fitting an air horn to my van, nothing special just a compressor and horn from ebay. I’m not following the instructions with the horn as this installation includes using a relay to...
  4. O

    Auto Electrics

    Ok, anyone got any ideas about the following "car" problem. Last week, on our family holiday our trusty Ford S-Max refused to start, so I called the AA and they took it to a Ford dealer to "unlock" the immobiliser, test and they fitted a new battery. Just left it for about 62 hours and its very...
  5. V

    WiFi PV Monitoring Auto update to PVOutput?

    Ok Guys, I Have a Wattson energy meter monitoring my PV and domestic energy usage. I know alot of you guys dont like them but i seem to love it. Only annoying thing is extracting the data and auto uploading it to PVoutput.org all the time. I have 2 inverters, so don't want to fork out for 2...
  6. M

    Hand off auto switching

    Ok folks, Here it goes, feedback will be greatly appreciated. I have to two lighting circuits broke through two contactors, the control circuit is broke through a hand off auto switch at the minute, however I have to install a one way switch at a communal point/landords, etc. I have ran a twin...
  7. M

    Auto null mayhem!!

    Hi all using a megger multi and the auto null for the leads is playing up, you null them and then the reading goes up or even down, try again and then it mite go up even more, is it leads or meter folks, what you think all??:93:
  8. J

    Auto Change Over Switch Advice

    Hi, Need some advice regarding the installation of an automatic change-over switch to protect the supply to a small commercial server room with two cabinets. The building has a three-phase TNS supply, and at present, the sub main supplying server room DB is a single phase 3 core SWA...
  9. T

    Auto Electrical - Day Running Lights led

    Hi all:waving: Any help with this would be gratefully received :smiley2: . I have fitted some led lights into the front of my bumper and have wired them into the side lights as I didn't want them on all the time like DRL's but I want them to go off when I put the headlights on. I guess I need...
  10. B

    Auto Electrics question

    Hi guys Happy new year to you all! My van got done just after Christmas. About £2k worth of tools stolen. Getting me a cheap car alarm at the mo to do me which wires to the internal light. Door opens, light goes on, alarm goes off...simples. The problem I have is I have 2 separate light...
  11. H

    An Auto Transfer Switch for a home generator ...!

    Hello everyone! I want to make an ATS for a house, with two power supplies, One from the power supply company and the other from a 5.6KVA Generator. I am facing a problem with the DC section of the starting mechanism, I want to make it so that, it should start the generator in a few second...
  12. G

    How to size a Auto Transformer Tapping % for a Pump motor ? Thanks

    Dear all, as suggested by the factory a Auto transformer tapping is 52% for our pump motor, which is 380V 3 phase. As a result, I should demonstrate how's come the setting is 52 % for the captioned motor. May I know for the calculation for it? what kind of information i should know before...
  13. T

    Information about auto electrics.....

    Hi all. Just posting to find out a bit about auto electrics, reason being is that as I'm an electrician, I often get asked if I can look at electrical faults on peoples cars. And I always turn it down as I've never touched any electrical stuff in cars before. Is there a course to do on auto...
  14. M

    Free Auto cad

    Hi everyone. Can anybody suggest a free electrical design program that I can introduce myself to. I don't know anything about it but want to try it out to see if it works for me. Preferably one with a tutorial.
  15. P

    Auto resetting RCD? help please...

    Hi guys, wonder if anybody can give me a little advice. I work away from home and own a salt water aquarium. Although I have somebody checking on and and feeding the tank eack day the house is often empty for 24 hours. On monday my electrics tripped and I lost the power in the house. The...
  16. 3

    ACB auto change over logic malfunctioning??

    Dear, i have probelm and i need ur indeed help. i have 415vac SWBD with 2 incomers 415vac and buscoupler in between, both incomers are from same 132kv grid. and when ever that grid has E/F or U/V the down streem loads will affected. the problem when the power resumed that 415vac Logic will be...
  17. i=p/u

    electric auto- mobile

    electric cars are on the up, has any1 heard of how these cars will be fixed when breakdown or serviced etc please give you knows on this. thanks trev..
  18. G

    Fluke 1653 auto rcd or not?

    Hi Which fluke has the auto RCD test like megger 1552 onwards is it 1653? Thanks.
  19. V

    Auto test RCD tester

    I am looking to buy a RCD tester with auto test function as I am fed up running backwards and forwards to the CU. Can someone point me in the right direction on good ones and bad ones. Thanks in advance.
  20. M

    Auto Electrical help needed please?

    Good Afternoon all, I'm sorry but this is my 1st post and i'm unfortuatley asking for some help! I'm Michelle, i'm 29 and i'm married to Brian who is an auto mechanic. We live in Kent with our 3 cats. here is the help we need!.... We seem to have found another 'possible' electrical fault. I...

OFFICIAL SPONSORS

Electrical Goods - Electrical Tools - Brand Names Electrician Courses Green Electrical Goods PCB Way Electrical Goods - Electrical Tools - Brand Names Pushfit Wire Connectors Electric Underfloor Heating Electrician Courses
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc

YOUR Unread Posts

This website was designed, optimised and is hosted by untold.media Operating under the name Untold Media since 2001.
Back
Top