Hi all,
I read through the post that dealt with using 12V LED bulbs in place of incandescent bulbs but my issue is a little different from that thread.
I will be checking out a ceiling fan that has 4 lights on it. The owner said he replaced all 4 incandescent 120VAC bulbs that were working with...
This is just a note about LED bulb failure. We had a desk lamp in which the A19 LED bulb would only go on after flipping the switch several times. In fact, once on, it would turn itself off after a few hours and then mysteriously pop back on. Ah, no sweat. Power cord is just not secure. I...
Hope this is the correct forum for this.
I have a chandelier that holds 18 bulbs, it's not in use since ages ago and I was planning to restore it to its former glory. Here's the thing, I also have more than 80 incandescent light bulbs taking up space in my workshop (long story) but they're all...
I've read lots of conflicting information on the internet about dimmable LED lightbulbs. Some people have said that even if a supplier claims that a LED lightbulb is dimmable using it with a dimmer can cause issues, such as it emitting a buzzing noise, flickering and it shortens the life of the...
I'm considering replacing all the lighting in our bungalow with LED bulbs including the six foot long flurecent fitting in the garage. Can anyone recomend the best place to use, Homebase, B & Q sort of outlet.
So I fancy myself fairly knowledgeable but this one has me stumped. My house was built in 2008.
In my basement and in my garage the only light bulbs that work are incandescent 60 W bulbs. I have attempted to use 100 W incandescent bulb and LED bulbs but they do not work.
So the other issue is...
Going to think about stepping away from Lucceco . But not wanting to pay fortunes . What bulbs do you have good results with when matching with the right dimmer modules etc ? thanks
Hello everyone, I need your help with rewiring this chandelier. It has 5 bulb insures as seen from first pic and it’s wires blue and brown wires on the rear.
Any ideas how to rewire them all together so I can have it installed as my ceiling light.
I’d really appreciate the help, don’t want to...
An electrician once told me that I should always be careful not to exceed too much wattage on each circuit in a house by replacing light bulbs with brighter ones that are of higher wattage (e.g. don't replace all 60W bulbs with 75W or 100W bulbs).
However, with the newer CFL and LED replacement...
Hi there! I just got my first two lamps that use G9 LED bulbs.
Very frustratingly, it's almost impossible to find bulbs within my criteria, which I really didn't expect to be the case.
I am looking specifically for 2700K warm white (i.e. very warm) and more than 5W. All I can seem to find are...
Have a ceiling fan/light combo about 25 yro. florescent, incandescent, and a solid white led bulb work fine. a smart led bulb RGB-wifi acts as if it isn't a good connection and flickers rapidly between what appears a 50% brightness and full. Fan appears to be just a B W G install. other smart...
Hello All, My name is Tom and I know just enough about electrical work to be dangerous, thus I usually have a professional do the work. That said, the most complex activity that prompts my question only requires the ability to change a bulb.
I have 10 individual lights in our bathroom that...
Hi there,
We moved into a house with a fair few spotlights. They've been going out here and there but now got to a point where we do need to replace them - only to find that they're integrated and the product is discontinued.
We have Megaman TH0106d 70mA 4000k 8w.
Photos of downlight and...
Not been on here a lot recently, so don’t know if this has been posted. I know this subject has been discussed before, but here is the final demise of halogen and fluorescent tubes in the UK, it seems in all but a few places...
Can I use two 3000 lumen LED bulbs (each bulb uses 32 watts) in a new floodlight? (rated 150 watts for each socket. I am currently using 1600 lumens bulbs and I would like to get more illumination. Thanks for everyone's help.
We've got an electrician coming to fit some lights in a 8m x 5m converted barn next week.
We've got 6x 3 bulb spotlight bars to install, 3 down each side, equally spaced. There's beams 1/3 and 2/3 of the way across so basically each sixth of the space will have one spotlight bar above it.
I...
I have touch lamps that came with 3w G9 Non Dimmable LED bulbs that obviously work, but are too bright i have been searching for 1.5 W LED bulbs equivalent to 15w incandescent, but only found one that works and that glows very slightly when off. all other will not work.
Can anyone tell me why...
My wife and I bought some Philips hue bulbs for our ceiling lights. They are E27 screw fit bulbs but our lamp holders are gx24q-1 so we bought some converters or adapters so we could use the E27 hue bulbs. I’ve plugged them in though and the bulbs don’t seem to work. Any advice? Do you think I...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc