Hi all. I recently had a 300w inverter go pop and I'd really like to try to repair it if possible (it's a valuable part of a solar energy system). Upon first inspection, the big metallized polypropylene film capacitor right next to the AC output has burnt. I've no idea if there is any further...
Hi all,
My washing machine is buzzing which I thought the motor was f&&*Ed but thought to test the capacitor by giving the motor a push start.
Starts just fine after which confirms it for me.
Anyone know any sites for spare parts?
Part number is 11.126/856-324
Not sure if this is the start...
Good Evening All
Not too good with motors so was wondering if anyone could help me.
110v cement mixer, press on button, buzzing and no rotation. Tried moving via belt, moves no problem. Measured start capacitor and have nothing (though its not been used for some time). Any ideas?
Thanks!
As per the title, I have a digistat +RF which is losing its connection, it has until now worked fine for eight years, last week i decorated the office so the only difference is the colour of the paint I connect it and it runs fine during the day and then overnight when the time clock switches...
transformer battery charger - http://overunity.com/16932/transformer-battery-charger/msg494683/#new
Basically do you know what will be the voltage of the charged capacitor on the right side?
the three phases have same number of turns.
so 240 V AC 50 Hz is splitted into two 120 VAC 50Hz (left...
Hi,
i recent bought a 2 poster screw type car ramp. Changed the motor for a 2.2kw motor. Wired it up and tested it with nothing on it and it went up and down no bother.
Put my 1 tonne Clio on it and it lifted about 1ft off the ground and then ground to a hault. It went back down no bother...
:welcome::conehead:Why are capacitor used across the contacts of lighting control contactors. I had some trouble with fluorescent lights blinking and found 48 volts coming thru the cap.277 volt circuit. Removed the cap and blinking stopped
Hello everyone,
This is my first post, so please bear with me. I am trying to work out how the motor to my table saw is wired. I bought it second hand and I think the previous owner has messed with it. One of the brush holders had been forced in and was touching the commutator. I am wondering...
Hi all,
I was called out to a business as their kitchen extractor fan isn't working. It has 230v but only rotates after you physically give it a flick rotation. I believe that I need a new capacitor? It has a variable speed controller. The capacitor looks very old and the tech info has...
Hello,
I am a translator translating a standards document from Chinese.
There are electricity-related sections in this document which contain a couple of terms for which I have not found an adequate translation.
These two terms translate literally as "electrical leak trace resistance" and...
Hi all,
My generator is only putting out about 50v when I start it up. After revving it for a bit it puts out 100v, but obviously still not enough for my 110v drills. It's quite old but don't really want to get rid of it. Anyone able to help with what's wrong with it?
TIA
Austin
Hi all,
I have an 82 coaster and I put together some day driving lights. Problem is, they pulsate. With my limited knowledge, I think I need a Capacitor in parallel, though I wouldnt have a clue as to what value Id be looking for? I looked around and it seems like Id need to read a whole book...
Hello,
I want to make a circuit using a photo-flash capacitor rating above to 100uf/100v, but here in my country (Iran) i cant find this kind of capacitors. Can i use several normal electrolytic capacitors in parallel instead of it? Do several identical capacitors in parallel work as a single...
Hello all,
I've got a 1956 Bernina sewing machine that, after DAYS of restoring/cleaning/oiling, decided to blow its motor capacitor. It was a wax capacitor and I'd like to replace it with a modern equivalent. All the local electrical services are baffled, one did find a 0.1uF filter...
hello,
so basically the motor on my saccardo cut off saw has just stopped.
how should i go ahead and diagnose such a motor?
i have had a little fiddle with it taking the motor off the cut off saw. Connected it to power, when i press the trip switch it has on it, it makes a noise but dose not...
I do not know if this is the properly place for this thread sorry if not
I have a graphics card and I break some of capacitor and choke
first capacitor
red color
fp
38bn
8 2 1
2.5
second capacitor
red color
fp
38ud
2 7 1
16
choke
maglc r30
where can I find this things ?
Disconnected a old one today stood about 600mm off floor said on front contains hazardous substances. Does anyone know if they full of copper or just oil.there was some copper links in top . Has anyone ever dismantled one
Hi to all. I'm trying to fit a vent axia extractor fan in my bathroom. I have wired the fan via a 2 pole switch and a 3amp fuse.
In short the circit runs : Bathroom Light = 3 amp Spur = 2 Pole Switch = Fan. For peace of mind no cables or switches are inside bathroom, switch is in adjoing...
Hi
I wonder if someone could please offer some advice regarding the replacement of a motor run capacitor on a band saw motor. The motor hums when switched on and the wheels only turn when they are turned by hand and I understand from a bit of research that this could be either the capacitor or...
Hi
I need to change a capacitor on a pump motor for a jacuzzi. I've been searching google but can't seem to find one with these specifications (see photo). Any help would be appreciated, Thanks
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc