I've been having a problem with my car's battery draining overnight, I narrowed it down to the L/DRM wire of my alternator, It draws 80 milliamps while the key is off, I unplugged it overnight and it didn't drain the battery.
Now I don't know why this would happen. Is it the alternator? or...
Hello.
I'm doing a favour for a farm friend, they have a water pump down a bore hole thats been slowing down recently.
The single phase 0.55KW motor is situated 40m down the well and the controls are at the distribution boards.
The voltage going to the single phase motor is reading L-E 247 &...
Hi, for some reason whenever I turn on my lamp it also turns on my PC. I have little to no electrical experience so I would just like some help with resolving this as it is quite annoying.
(Both the PC and lamp are both connected to the same Power Strip/extension cord)
First post on any kind of forum so please be gentle with me!!
I moved into this house a couple of months ago and the vendor had a solar PV installed 5 years ago now. Recently I have had random tripping of my main RCD for what I believe to be a result of the Solar PV. I’ve attached a couple of...
So Our Centaur 50 Turbine engine shutdown on High Fwd Gearbox Vibration. SD set point is 16G. Looked at the trends and for two hours spiked from 1.6 to 15.9. Quite a substantial and non linear rise.
checked Prox probes. Tested Proximeters and measured Gap voltage, all ok. Checked Gear box...
Hi all
To start off, there’s been no work on the ring main for 8 years or so. (Other than having a smart metre fitted about 12 months ago)
Yesterday afternoon I noticed a buzzing from a plug socket. I unplugged what was plugged in thinking it was the appliance and didn’t think anything more of...
I have a customer who has seen a massive rise in unit usage, then a bit of nuciance tripping. I went out to investigate & discovered a low IR (about 0.1M) on one of the socket circuits. I disconnected the faulty section to get the power back on & will return another day to bypass the faulty...
Hi there, new to the forum so be gentle!
We live in a second floor flat above a bakery shop. The shop has plenty of machinery including large freezers that run all night. Recently we have noticed a reasonably high pitched electrical buzz coming from one wall in our flat. Across multiple rooms...
Hi all,
My apologies in advance if this is posted in the wrong category, there were a few options it could've potentially fallen under.
We have just completed our garage to home cinema conversion, but having a small (major!) issue. In the Cinema we have all the usual tech you'd expect, a...
Hi all.
Thank you all in advance for your help and advice.
I was hoping to get some help and advice on a cooker issue I'm experiencing.
My cooker is "brand new" and I recently had it installed by my father inlaw (competent tradesman although not an electrician)
The cooker is brand new but...
I have two line wires coming out of the top of the 'Sockets' B32 MCB. One of those line wires connects to 3 sockets in the bedroom and the other wire connects to 5 sockets in the living room.
Each socket takes two line wires, one to power the socket and the other to pass the current onto the...
Today I had a routine socket change. The present one was tripping the RCD. The customer had used one of those double conversion sockets that utilise a single back box. I noticed that the right hand switch on the socket would not turn off.
I chased out and fitted a proper double socket. All...
Hi guys,
Don't know if I picked the wrong builder, products, am desperately unlucky or its the relay switch...all help much appreciated!
Background facts
• Back to bricks refurb of duplex flat, all new wiring etc.
• Upstairs en suite utilises same in line fan as existing bathroom. Builder...
Hi. I am currently facing a situation which I never encountered before and was wondering if any of you has experienced it before and might help me out with a solution please.
At work, some people are having static electric shock and it's causing there's and there neighbor's monitor to go blank...
I have a Tefal 1000 deep fat fryer. It is the first time I have used it. Was given as new a few years ago.
I used the same outlet as I use for the kettle 2200w and a microwave 700w.
The Tefal was on for around 30 seconds and it tripped the RCD in the house electric.
Kettle works fine and also...
I have spoken to a chap this morning that's has recently had his kitchen lights replaced with LED mr16s by utility warehouse. Since the change if the lights are turned on whilst the DAB radio is on it completely stops any signal.
Has anyone come across this before. I was wondering if changing...
I have had x3 faults appear recently on plumbing/electrical systems to which I have fitted Immersun:
- A Cotherm immersion on a Megaflow cylinder went open circuit after about 2 years of Immersun use. Needed to be drained and new immersion fitted.
- A Cotherm immersion on an Albion cylinder...
Hi,
overvthis is last week I have lost a few friends,
all over the EU issue.
the conversation doesn't even get going and people just fall out with me, tonight I was told to f... Off and our friendship was over, he asked who I voted for so i told him. I have known him 7 years.
every day I...
Hello all. I work at a rescue boat and we use a converted Thwaites 5 ton dumper truck as our launch vehicle. It has orange flashing LEDs on the front but sometime they will just turn off. Obliviously theI sea water has its effects on the tractor but it seems at low rpms the lights turn on and...
hi i havint worked as an electrician for a good few years and a problem im having is wrecking my head. I came home last night and my lights seemed dim and where flicking (just put it down to bad weather) but when i turned my cooker on all my lights went out. after pulling the house apart i...
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc