New fan with light - and remote.
Wiring in first pic from manual. Black, brown, blue, white.
Second pic - my light fixture pulled down with wires. Black wire not connected to anything.
Two switches on wall. One turns on black/hot to two light wires. Other switch only turns on single black wire...
Hey all.
New here and new to 3 phase.
I had some electric experience on set in Los Angeles as a gaffer for a couple of years, but it was mainly single-phase - counting amps and avoiding blowing circuits type deal. Also did basic wiring in my old 73 chevy truck as well. So nothing huge.
But...
Hello,
So In my bathroom i already have four downlighters and i am wanting to add two Bluetooth ceiling speakers (see link below)
What do i need to buy in order to make it so i do not need to have these 'plugged into a socket' and just have them wired to the downlighters and get their power...
I am about to start wiring two flats from scratch. The builder board the ceiling and make it fireproof my first fix will be to this ceiling. Then they suspend another ceiling under that by 150mm with accoustic/thermal so my wires will be inside that. I am planning to use metal plastic coated...
Hi all. I am trying to replace a ceiling light but the new light has a different wiring connection. If the answers simple enough I will do it myself as done this type of thing before. If not ill wait for my electrician but getting hold of anyone to do this at the minute is impossible.
Ive...
Hello all.
I want to fit LED strip lights to the ceiling with 45 degree channeling and diffuser around my son’s room. As there are so many different types, brands, lengths, amps/volts, accessories etc I could use some advice from anyone who’s done this please and the most reliable site to order...
Hi everyone, I need some advice please.
I'm thinking of buying a few of these for the house:
https://lights4less.com.au/products/peg-diy-suspension-300mm-black-ol2010-30bk
They look very easy to install and looks nice too.
It says max wattage is 60w.
I will be using a Philips Hue 100w LED...
Hi all, I have a metal ceiling light I would like to change back to a light pendant, the cables are in a connection strip so can I use this to attach the new pendant or do I undo the strips and start from scratch and wire all into the new pendant connections. Thank everybody
Hi guys, how does one go about wiring a ceiling fan from this light fixture? Apart from the standard live nuetral and earth wires it has 2 additional, red and white, I'm guessing for the switch?
Hi all. We have a light fixture that has single bulb fixture on ceiling.
I want to change this to a 2 bulb fixture. Is this just as simple as removing the existing fixture and wiring the 3 into the double bulb one?
I see black/red/greenyellow wires currently attached.
Not so good with...
Hi all, does anyone know why my living ceiling lights have started to do this? Their LED lights linked to a dimmer, and have worked for the last couple of years since I moved into the place. Is this something that I can fix myself or should
I leave it to the pros?
Hi All,
Trying to ascertain why a DC MinkaAire fan (84") will no longer change speeds, or in some cases even start itself in the lowest setting speed.
I have replaced the receiver/controller on the fan (U shaped PCB), but the new one did not resolve the issue.
I can get the fan to run...
I have a ceiling fan which currently has a remote control for fan speed and dimming the attached lights.
We're currently doing some works in the room, and I have the opportunity to add switches by the door. As SWMBO has trouble reaching some of the standard/table lamps, I'll be adding switched...
Hi all,
I stupidly unplugged all the wires from my ceiling rose to install a light instead of plugging it into the available spaces on the block. Now I'm trying to put the wires back in but there is 1 wire extra! Please see the image included. Any help will be great, thanks!
Has anyone got these to actually work?
I got given 3 to fit today. I normally use AICO but have often wondered about these ones.
Mains powered, plenty of space inside, all looking good.
Instructions say to press learn button on each device, turn mains on, and fit detectors.
All was going...
I am replacing my ceiling rose with a metal 4 spot light bar, the cables are to short to be able to secure them unless I release the block from the light it’s self.
I can then wire it with ease but can’t get the block back into the fixed earth nut.
Would it be ok to replace this nut with a...
Can I put a key switch on the ceiling for the non maintained emergency light illuninare. This is so that they are no wire trunking showing on the wall.
Any recommendations on good quality flush mounted PIR sensor that work well?
Need to install one in a upper market property, and had some poor experiences before with the stuff from the sheds.
Needs to be as flush as possible ideally...
Recently bought a none contact voltage tester and decided to use it on a few things around the house but a metal bedroom light is lighting up red and beeping to say the light is live. I have tried it on all of the parts of the light and it lights up everywhere. I am too scared to touch the metal...
The property I've moved into has no light in the lounge, just 3 grey wires (each containing the live, neutral & earth wires) poking out of the ceiling rose. How do I identify which wire does what?
Best EV Chargers by Electrical2Go! The official electric vehicle charger supplier.
OFFICIAL SPONSORS
These Official Forum Sponsors May Provide Discounts to Regular Forum Members - If you would like to sponsor us then CLICK HERE and post a thread with who you are, and we'll send you some stats etc